Component Assembler Tester, 1St Shift - Navy Systems

Johnson

York and North Yorkshire

On-site

GBP 27,000 - 39,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Bonus eligible

Job summary

Johnson Controls Navy Systems in York, PA is seeking a Component Assembler Tube/Tester for 1st Shift to join our team. You will work from drawings and process sheets to lay out, assemble and test tubing, fittings and components for chilled water systems used by the US Navy and Coast Guard.

The role requires reading blueprints, precise measurement with a tape, and the ability to work safely with hand tools in a collaborative environment.

Qualifications

  • Ability to read blueprints, schematics, and general drawing arrangements
  • Ability to read and interpret measuring tape accurately to measure and cut materials
  • Ability to apply measuring specifications to equipment and products
  • Knowledge of hand tools.
  • Effective communication skills with the ability to work in a team environment
  • Ability to maintain clean and safe work area and/or equipment

Responsibilities

  • Layout, determine route of piping and tubing, location and type of supports, measure, cut to length; flare, thread.
  • Assemble, level, connect, braze fittings, controls, components.
  • Check operation of oil filters, oil drain, diagnose problems, repair, replace components.
  • Assemble valves, oil filters, pumps, lubricating devices, covers, gaskets, pressure control panels.
  • Erect motor drives, layout, locate holes, position components, determine, maintain clearances, level, align, drill and tap flange connections.
  • Fit tapered pins and keys, shrink rotors on shaft.
  • Charge systems with refrigerant and air, leak check, repair leaks.

Skills

Blueprints
Measuring tape
Measuring specs
Hand tools
Communication
Safety

Job description

Job Description

We are seeking a Component Assembler Tube/Tester, 1st Shift to join our Navy Systems team at our York, PA plant. We're keeping the Navy cool. Literally. The primary mission of our Johnson Controls Navy Systems team is to supply large, chilled water HVAC and refrigeration systems to the US Navy and US Coast Guard. This job consists of performing operations required to lay out, assemble, erect, lead check, perform air run, oil and air pressure test, vacuum test system and repair direct drive power generation sources to compressors. Assemble, repair tubing, piping and fittings of engineered production systems. At Johnson Controls, we support our nation’s most critical facilities, the people who occupy them, and the missions they enable. Johnson Controls Federal Systems (JCFS) is a specialized team serving as a trusted partner to the federal government. We help modernize U.S. military installations, Department of Defense and other federal agency facilities to be smarter, more resilient, efficient, sustainable, and secure. Location: Grantley Plant in York, PA Pay: Union rate of $31.79 per hour Shift: 1st Shift Bonus Eligible: Yes Johnson Controls Navy Systems – Promotional Video As a Component Assembler Tube/Tester, you will:

  • Working from isometric drawings, orders, process sheets, specifications, instructions.
  • Layout, determine route of piping and tubing, location and type of supports, measure, cut to length; flare, thread.
  • Assemble, level, connect, braze fittings, controls, components.
  • Check operation of oil filters, oil drain, diagnose problems, repair, replace components.
  • Assemble valves, oil filters, pumps, lubricating devices, covers, gaskets, pressure control panels.
  • Erect motor drives, layout, locate holes, position components, determine, maintain clearances, level, align, drill and tap flange connections.
  • Fit tapered pins and keys, shrink rotors on shaft.
  • Charge systems with refrigerant and air, leak check, repair leaks.
Required Qualifications
  • Ability to read blueprints, schematics, and general drawing arrangements
  • Ability to read and interpret measuring tape accurately to measure and cut materials
  • Ability to apply measuring specifications to equipment and products
  • Knowledge of hand tools.
  • Effective communication skills with the ability to work in a team environment
  • Ability to maintain clean and safe work area and/or equipment
Who We Are

The primary mission of Johnson Controls Navy Systems is to supply Chilled Water Air Conditioning, Refrigeration Systems and associated equipment to the US Navy and US Coast Guard. Johnson Controls Navy Systems is a part of the Johnson Controls Federal Systems business. Our robust, high reliability products are designed, manufactured and tested in York, PA to military and other stringent customer specifications. Most of our designs are custom engineered for the specific application If you’d like to learn more about who we are, what we do, and the systems and products we work with please check out our “Who we are” video on Youtube to learn more. (Around 2 minutes long) https://www.youtube.com/watch?v=AD9TF3ANMxU Recently, Johnson Controls has been recognized by several organizations for leadership in Environment, Sustainability and Governance, as well as innovations in smart building platforms:

  • Named to FORTUNE’s “Most Admired Companies” List
  • Corporate Knights Global 100 Most Sustainable Corporations in the World
  • Named to Forbes Net Zero Leaderslist
  • CDP 2023 Climate Change 'A List'
  • Ranked 67 on the Drucker Institute’s list of best-managed companies in America
  • Forbes Best Employers for Diversity
  • Newsweek America’s Greatest Workplaces for Diversity
  • Ethisphere 2024 World's Most Ethical Companieslist for the 17th time
  • Newsweek America’s Greatest Workplaces for Women in 2024
  • Named to Newsweek America’s Greatest Workplaces for Veterans 2024 / 2025listing
  • Named to Forbes America’s Best Employers for Veterans 2024
  • Named one of the top military friendly employers by military.com.

Johnson Controls is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/careers #LI-JW2 #LI-Onsite Johnson Controls’ Canadian subsidiaries are committed to providing reasonable accommodation to applicants, candidates and employees with disabilities, in accordance with applicable human rights legislation, and in Ontario, in accordance with the Accessibility for Ontarians with Disabilities Act (“AODA”). When requested, accommodation will be provided throughout all stages of the recruitment and selection process. To request accommodation, please contact us. Any information you provide related to accommodation measures will be treated as confidential. A copy of Johnson Controls’ applicable AODA policies are available on our website at www.johnsoncontrols.com for your reference, and can be made available in accessible formats upon request.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electrician Systems, 2Nd Shift - Navy Systems
Electrician Systems, 2Nd Shift - Navy Systems

Johnson • York and North Yorkshire

On-site
GBP 34,000 - 46,000
Welder, 2Nd Shifty - Navy Systems
Welder, 2Nd Shifty - Navy Systems

Johnson • York and North Yorkshire

On-site
GBP 42,000 - 44,000
Benefits on first day
Unionized position
Maintenance Mechanic (Manufacturing Maintenance) (Job Number: 1669)
Maintenance Mechanic (Manufacturing Maintenance) (Job Number: 1669)

Johnson • York and North Yorkshire

On-site
GBP 31,000 - 45,000
Relocation assistance may be available
Human Resources Manager
Human Resources Manager

Johnson • York and North Yorkshire

On-site
GBP 76,000 - 113,000
Benefits from day one
Paid time off: 3 weeks vacation, 5 sck
3 floating holidays & 10 holidays per
Sr. Plant Production Supervisor, 1St Shift - (Job Id: 1663)
Sr. Plant Production Supervisor, 1St Shift - (Job Id: 1663)

Johnson • York and North Yorkshire

On-site
GBP 58,000 - 72,000
Bonus Eligible
Benefits from day one
3 weeks vacation
+2
Cmm Inspection (Precision Gauging / Manufacturing) - 2Nd Shift (Job Id: 1677)
Cmm Inspection (Precision Gauging / Manufacturing) - 2Nd Shift (Job Id: 1677)

Johnson • York and North Yorkshire

On-site
GBP 32,000 - 46,000
Relocation assistance may be available
Benefits on first day of employment
Weld Inspector, 2Nd Shift - Navy Systems
Weld Inspector, 2Nd Shift - Navy Systems

Johnson • York and North Yorkshire

On-site
GBP 43,000 - 45,000
Benefits on first day of employment
Electronic Specialist (Manufacturing Maintenance) (Job Number: 1670)
Electronic Specialist (Manufacturing Maintenance) (Job Number: 1670)

Johnson • York and North Yorkshire

On-site
GBP 33,000 - 47,000
Relocation assistance
Benefits from day one
Plant Quality Engineer (Welding/Fabrication/Assembly) (Job Number: 1681)
Plant Quality Engineer (Welding/Fabrication/Assembly) (Job Number: 1681)

Johnson • York and North Yorkshire

On-site
GBP 61,000 - 83,000
Benefits from day one
Paid vacation
Sick days and holidays
Contracts Manager
Contracts Manager

Johnson • York and North Yorkshire

On-site
GBP 106,000 - 136,000
Benefits on first day
PTO: 3 weeks
Sick days: 5
+2