CMM Programmer / Operator

Airbus S.A.S.

Broughton

Vor Ort

GBP 45.000 - 65.000

Vollzeit

Vor 4 Tagen
Sei unter den ersten Bewerbenden

Eine vollständige Bewerbung in einer Minute

Maßgeschneiderter Lebenslauf und Anschreiben – versandbereit.

Schaffe es an den ATS-Filtern vorbei

Benefits dieser Stelle

Competitive salary
Profit share
Pension
Car leasing
Free onsite parking
10,000+ E-learning courses
Wellbeing benefits

Zusammenfassung

Airbus in Broughton is seeking a skilled CMM Programmer / Metrologist to ensure precision dimensional inspection of parts, tooling and assemblies. You will operate CMMs and develop measurement programs using PC-DMIS, Calypso, LK Camio and related software.

Fine data analysis, NCR handling, and documentation for FAI/SPC are part of the role. A full Apprenticeship or NVQ Level 3 in Machining/Metrology is required, with GD&T expertise.

Qualifikationen

  • Full Apprenticeship in Machining/Metrology or NVQ Level 3 or equivalent.
  • Strong GD&T and blueprint reading skills with ASME Y14.5 / ISO 1101 familiarity.
  • Hands-on experience with CMMs and metrology tools.

Aufgaben

  • Setup, calibrate, and qualify CMM probes and fixtures for measurement runs.
  • Load, align, and run inspection programs on complex parts and tooling.
  • Analyze measurement data and report NCRs for root-cause investigation.
  • Produce inspection reports, FAI sheets, and SPC documentation.
  • Support calibration, maintenance, and R&R studies.

Kenntnisse

CMM programming
Metrology
GD&T
PC-DMIS
Calypso
LK Camio
CATIA
Dimensional inspection

Ausbildung

Apprenticeship in Machining

Tools

PC-DMIS
Calypso
LK Camio
SA
Renishaw MODUS

Jobbeschreibung

adoption / shared parental / caregiving leave, purpose built maternity rooms on site

Inclusive Environment

Wellbeing room, Multi-faith room, Employee Representative Groups (Gender, LGBTQ+, International, Generational, Disability, Social & Cultural Diversity, Neurodiversity) Our world is changing. And so are we. From our commitment to zero-carbon flight to cleaning up space, sustainability is at the heart of our purpose. So what's your next change?

Coordinate Measuring Machine (CMM) Programmer / Metrologist

The Coordinate Measuring Machine (CMM) Programmer / Metrologist is responsible for precision dimensional inspection, quality verification, and metrological analysis of manufactured parts, tooling, and assemblies. Operating within quality assurance, machining, and tooling operational environments, this role ensures all components strictly conform to 3D CAD models, engineering drawings, and Geometric Dimensioning & Tolerancing (GD&T) standards.

HOW YOU WILL CONTRIBUTE TO THE TEAM
  1. Equipment Setup & CMM Operation Machine

    • Preparation: Calibrate, configure, and qualify CMM probes, styli, and sensor systems prior to measurement runs.
    • Part Loading & Fixturing: Securely position and align complex parts, jigs, and tooling fixtures on the CMM granite bed using precision work‑holding equipment.
    • Inspection Execution: Run manual, semi‑automated, and fully automated CNC/DCC measurement programs to verify linear, angular, and complex geometric features.
  2. CMM Programming & Metrology Setup

    • Program Execution & Editing: Load, edit, and optimize existing CMM routines (or generate programs using reverse engineering solutions) using industry‑standard metrology software (e.g., LK Camio, PC‑DMIS, ZEISS CALYPSO, SA, PolyWorks, or Renishaw MODUS).
    • CAD Alignment: Align physical components to 3D CAD models using standard reference frame methods (3‑2‑1, iterative, or datum target alignments).
  3. Data Analysis & Quality Control

    • Dimensional Inspection: Compare measured data against 2D blueprints, engineering specs, and GD&T limits.
    • Non‑Conformance Reporting (NCR): Identify, flag, and document dimensional out‑of‑tolerance conditions; isolate defective components and collaborate with quality/process engineering for root‑cause analysis.
    • Documentation & Reporting: Produce clear inspection reports, First Article Inspection (FAI) sheets, and Statistical Process Control (SPC) documentation for compliance tracking.
  4. Maintenance & Calibration Support

    • Routine Care: Perform daily operational checks, clean granite reference surfaces, check pneumatic/air bearing supply lines, and maintain standard equipment hygiene.
    • Calibration Audits: Assist with periodic machine recalibration, artifact calibration, and gauge R&R (Repeatability & Reproducibility) studies.
ABOUT YOU
  • Successful candidates must have completed a full Apprenticeship in Machining, Mechanical Engineering, Metrology, Toolmaking, or Precision Machining / an NVQ Level 3 (or equivalent technical diploma/qualification).
  • GD&T & Blueprint Reading: Strong proficiency in ASME Y14.5 / ISO 1101 standards, technical drawings, datum structures, and feature control frames.
  • Metrology Tools: Hands‑on experience with CMMs, plus manual precision tools (micrometers, height gauges, bore gauges, dial indicators, gauge blocks).
  • Software Proficiency: Familiarity with CMM software (PC‑DMIS, Calypso, LK Camio, SA, etc.) and CAD viewing‑modeling environments (CATIA).
  • Mathematical Aptitude: Sound understanding of spatial geometry, trigonometry, and coordinate transformation systems.

Not a 100% match? No worries! Airbus supports your personal growth with customised development solutions.

HOW WE CAN SUPPORT YOU
  • Many of our staff work flexibly in many different ways, including part‑time.
  • Please talk to us at interview about the flexibility you need and we’ll always do our best to accommodate your request.
  • Please let us know if you need us to make any adjustments.
Job Details
  • Location: Broughton
  • Type: Full time
  • End Date: November 28, 2026
  • Security Clearance: Eligibility to gain UK SC Security Clearance
  • WHAT'S IN IT FOR YOU
Benefits
  • Financial Reward: Competitive salary, annual profit share, contributory pension, share options, car leasing scheme, free onsite parking, various optional salary sacrifice benefits, shopping discounts and much more
  • Personal Development: Personalised development plan and unlimited access to 10,000+ E‑learning courses, internal mobility including international opportunities
  • Health & Wellbeing: Wellbeing benefits (including 24/7 online GP and mental health support), discounted family health / dental insurance / eye tests, cycle‑to‑work scheme, on‑site canteen and coffee shop
  • Family and Caregiving: Life assurance, enhanced pay for parental leave (23 weeks at 100% pay)
Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

CMM Programmer / Operator
CMM Programmer / Operator

Airbus SE • Broughton

Vor Ort
GBP 42.000 - 54.000
Profit share
Pension
Share options
+3
CMM Programmer / Operator
CMM Programmer / Operator

3631 Airbus Operations Limited • Broughton

Vor Ort
GBP 42.000 - 70.000
Contributory pension
Share options
Car leasing scheme
+5
CMM Programmer / Operator
CMM Programmer / Operator

Airbus SE • Broughton

Vor Ort
GBP 35.000 - 55.000
CMM Programmer / Operator
CMM Programmer / Operator

3631 Airbus Operations Limited • Broughton

Vor Ort
GBP 42.000 - 64.000
Profit share
Pension
Share options
+4
Linux Systems Engineer
Linux Systems Engineer

Airbus S.A.S. • Immingham

Hybrid
GBP 60.000 - 90.000
Competitive salary
Hybrid working
Pension scheme
+5
Linux Systems Engineer
Linux Systems Engineer

Airbus S.A.S. • Albury

Hybrid
GBP 65.000 - 90.000
Hybrid working
Competitive salary and pension
Pension scheme
+1
Linux Systems Engineer
Linux Systems Engineer

Airbus S.A.S. • Radlett

Hybrid
GBP 60.000 - 90.000
Profit sharing
Contributory pension
Car leasing scheme
+4
Linux Systems Engineer
Linux Systems Engineer

Airbus S.A.S. • Silsoe

Hybrid
GBP 60.000 - 85.000
Competitive salary
Profit sharing
Pension
+7
Linux Systems Engineer
Linux Systems Engineer

Airbus S.A.S. • Hail Weston

Hybrid
GBP 60.000 - 90.000
Profit sharing
Pension scheme
Hybrid working (Stevenage)
+1
Linux Systems Engineer
Linux Systems Engineer

Airbus S.A.S. • Beeston

Hybrid
GBP 52.000 - 76.000
Competitive salary
Profit sharing
Pension plan
+1