Postdoctoral Researcher in Semiconductor Electrical Characterization and Thin-Film Metrology

Aalto

Espoo

On-site

EUR 47,000 - 52,000

Full time

6 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Occupational healthcare
Opportunity to co-found startup

Job summary

Aalto University invites applications for a Postdoctoral Researcher in semiconductor electrical characterization and thin-film metrology. The role focuses on designing and executing high-precision electrical measurements on ultrathin films, developing analytical models, and benchmarking against metrology standards.

The project offers 18 months of funding with potential extension, based in Espoo, Finland, and a pathway toward joining a deep-tech startup as a technical leader or co-founder.

Qualifications

  • PhD in semiconductor physics, Materials Science, Solid-State/Applied Physics, Micro-/Nanoelectronics, Electrical Engineering, or closely related experimental field.
  • Advanced electrical characterization expertise in thin films or solid-state devices, including low-current I–V, C–V, and impedance/dielectric spectroscopy.
  • Strong MOS/MIS/MIM device physics knowledge, high-k dielectrics, dielectric breakdown, charge trapping, interface states, and noise minimization.
  • Ability to build analytical models and numerical simulations (e.g., COMSOL, Python, MATLAB) to interpret data and guide measurements.
  • Hands-on experience with semiconductor test structures and thin-film deposition/characterization workflows (ALD, ellipsometry, electrical SPM).
  • Fluency in English; Finnish not required; interest in transitioning to startup leadership.

Responsibilities

  • Lead electrical characterization strategy with high-precision measurements on ultrathin films and semiconductor structures.
  • Develop physical models and simulations to predict responses and guide experiments.
  • Interpret data into material metrics, distinguishing true effects from noise and artefacts.
  • Prepare test structures and reference films to benchmark system performance against standards.
  • Collaborate with instrumentation team and industry partners for validation and deployment.

Skills

Electrical characterization
Semiconductor physics
Modeling & analysis
Cleanroom & thin-film familiarity
Entrepreneurial drive & communication

Education

PhD in semiconductor physics or related field

Tools

COMSOL Multiphysics
Python
MATLAB
ALD/ellipsometry/electrical SPM

Job description

The ATOMEL project, led by Dr. Ali Afzalifar and hosted within the Soft Matter and Wetting Group headed by Prof. Robin Ras, invites applications for a Postdoctoral Researcher position in semiconductor electrical characterization and thin-film metrology. The project is funded through a Business Finland Research-to-Business (R2B) commercialization grant.**ABOUT THE JOB**Are you an experimental semiconductor physicist, materials scientist or experienced R&D engineer/researcher in a closely related field excited about developing next-generation metrology instrumentation and building an international deep-tech startup from research?ATOMEL is a Business Finland Research-to-Business (R2B) project aimed at translating an academic innovation in scanning-probe-based thin-film characterization and electrical metrology into a new deep-tech venture serving the semiconductor industry. As modern microelectronics and advanced device architectures scale to increasingly complex ultrathin film structures, conventional metrology methods face growing limitations in resolving localized electrical and material properties.With our mechanical and instrumentation development already underway, we are seeking an experienced Postdoctoral Researcher to take full scientific and experimental ownership of our semiconductor electrical characterization strategy, physical modeling, and benchmark validation**YOUR ROLE AND GOALS**You will join a focused, full-time R2B core team working in tandem: you (leading Semiconductor Physics & Electrical Metrology), the other postdoctoral researcher/engineer (leading high-precision instrumentation, automation and control systems), our Business Developer (commercial lead), and Dr. Ali Afzalifar (project leader). After a brief onboarding phase, you are expected to operate with a high degree of scientific autonomy, guiding the team on experimental design and measurement physics. **Key responsibilities include:** * **Electrical Characterization & Protocol Design:** Lead the material characterization strategy by independently designing and executing high-precision electrical measurements (such as low-current I–V, C–V, and frequency-dependent impedance/dielectric characterization) on ultrathin films and semiconductor structures.* **Physical & Electrostatic Modeling:** Develop analytical physical models and numerical simulations (e.g., finite-element electrostatic and transport modeling) to predict electrical responses, evaluate substrate and interface effects, and guide experimental parameter selection.* **Solid-State & Dielectric Data Interpretation:** Translate raw electrical datasets into reliable physical metrics—such as conduction and leakage mechanisms, dielectric breakdown, charge trapping, and interfacial defect states—while rigorously distinguishing true material behavior from measurement noise, parasitics, and artefacts.* **Test Structure Preparation & Benchmarking:** Select, design, and prepare representative semiconductor test vehicles and reference thin films (utilizing OtaNano/Micronova cleanroom and thin-film facilities where needed) to validate and benchmark system performance against established metrology standards.* **Hardware-Physics Integration & Industrial Validation:** Work closely with the instrumentation engineer to optimize electrical measurement workflows on the prototype platform, and contribute to application validation and technical discussions with industrial semiconductor partners.**YOUR EXPERIENCE AND QUALIFICATIONS** We are looking for a hands-on experimentalist who does not merely run standard commercial recipes, but understands the underlying measurement physics deeply enough to design and troubleshoot new characterization experiments from first principles. * **Doctoral Degree (PhD)**: A PhD in semiconductor physics, Materials Science, Solid-State/Applied Physics, Micro-/Nanoelectronics, Electrical Engineering, or a closely related experimental field.* **Advanced Electrical Characterization Expertise:** Proven track record in designing and executing high-precision electrical measurements on thin films or solid-state devices, including low-current I–V, C–V, and frequency-dependent impedance or dielectric spectroscopy.* **Semiconductor & Dielectric Physics:** Strong understanding of MOS/MIS/MIM device physics, high-k dielectrics, electrical transport, dielectric breakdown, charge trapping, interface states, and low-noise/parasitic mitigation in sensitive electrical measurements.* **Modeling & Quantitative Analysis:** Ability to build analytical physical models and numerical simulations (e.g., COMSOL Multiphysics, Python, or MATLAB) to interpret experimental data and guide measurement design.* **Cleanroom & Thin-Film Familiarity:** Practical experience with semiconductor test structures and thin-film deposition/characterization workflows (e.g., ALD, ellipsometry, electrical SPM, or cleanroom wafer testing) is an advantage.* **Entrepreneurial Drive & Communication:** Fluency in English (Finnish is not required), independent problem-solving mindset, and strong motivation to transition into the upcoming deep-tech spin-out company as a key technical leader or potential co-founder after the R2B phase.**WHAT WE OFFER**We offer a high-impact position at the intersection of frontier nanoscale science and commercial semiconductor hardware. You will be based in the Department of Applied Physics at Aalto University with direct access to world-class cleanroom and characterization infrastructure at OtaNano and Micronova (including ALD, electron microscopy, ellipsometry, and advanced electrical/SPM laboratories), alongside mentoring from Aalto Innovation Services and Aalto Startup Center. **After the project, there is an opportunity to become part of the new deep-tech startup as a co-founder.**The position is full-time and initially funded for 18 months, with the possibility of extension. The salary depends on experience, with a starting salary of 4229,48–4649,25 € per month (gross). The position includes occupational healthcare.We value a healthy work–life balance and actively support personal and professional development. You will have opportunities to collaborate with leading academic and industry partners and contribute to the development of cutting-edge thin-film metrology instrumentation for the semiconductor industry.**Join us!**Please submit your application including the attachments mentioned below as one single PDF document in English through our online recruitment system by using the link on Aalto University’s web page (click the “Apply Now” button).* A letter of motivation (**max. 1 page**): Describe your background, why you are the right person for this role, your interest in research commercialization, and **your earliest possible starting date**.* **Curriculum vitae:** Including a list of publications and contact details for at least two academic or industrial references* **PDF copy of your original doctoral certificate:** Including English translation (Finnish and Swedish certificates are also accepted).*Please note: Aalto University’s employees should apply for the position via our internal HR system Workday (Internal Jobs) by using their existing Workday user account (not via the external webpage for open positions). If you are a student or visitor at Aalto University, please apply with your personal email address (not aalto.fi) via* *Aalto University open positions*The deadline for applications is **15 December 2026, but candidates are strongly encouraged to apply as soon as possible.** Applications will be reviewed on a rolling basis, and we will invite suitable candidates to interview already during the application period. The position will be filled as soon as a suitable candidate is identified.The position is available immediately, and the starting date can be agreed upon with the selected candidate.For further information, contact Dr. Ali Afzalifar, ali.afzalifar@aalto.fi, or via phone +358 (0)503515837.*Aalto University reserves the right for justified reasons to leave the position open, to extend the application period, reopen the application process, and to consider candidates who have not submitted applications during the application period.*
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Postdoctoral Researcher in Semiconductor Electrical Characterization and Thin-Film Metrology
Postdoctoral Researcher in Semiconductor Electrical Characterization and Thin-Film Metrology

Unist • Espoo

On-site
EUR 47,000 - 52,000
Doctoral Researcher – Heterogeneous Integration for Power Electronics
Doctoral Researcher – Heterogeneous Integration for Power Electronics

Aalto • Espoo

On-site
EUR 32,000 - 38,000
Doctoral Researcher in condensed matter physics and two-dimensional (2D) Quantum Devices
Doctoral Researcher in condensed matter physics and two-dimensional (2D) Quantum Devices

Aalto • Espoo

Hybrid
EUR 32,000 - 38,000
Occupational healthcare
Hybrid work model
Professional development opportunities
+1
Postdoc: Semiconductor Electrical Metrology & Thin-Film
Postdoc: Semiconductor Electrical Metrology & Thin-Film

Unist • Espoo

On-site
EUR 47,000 - 52,000
Postdoc: Semiconductor Electrical Metrology for Ultrathin Films
Postdoc: Semiconductor Electrical Metrology for Ultrathin Films

Aalto • Espoo

On-site
EUR 47,000 - 52,000
Occupational healthcare
Opportunity to co-found startup
Postdoctoral researcher in quantum algorithms and optimization for Life Science applications
Postdoctoral researcher in quantum algorithms and optimization for Life Science applications

Aalto • Espoo

Hybrid
EUR 42,000 - 51,000
Assistant Professor, Experimental Quantum Physics
Assistant Professor, Experimental Quantum Physics

Aalto • Espoo

On-site
EUR 54,000 - 90,000
Start-up package
Relocation support
Access to facilities
Postdoctoral researcher in quantum algorithms and optimization for Life Science applications
Postdoctoral researcher in quantum algorithms and optimization for Life Science applications

Quantiki • Espoo

Hybrid
EUR 40,000 - 54,000
PhD in Condensed matter physics and two-dimensional (2D) Quantum Devices
PhD in Condensed matter physics and two-dimensional (2D) Quantum Devices

Aalto University • Espoo

Hybrid
EUR 32,000 - 38,000
Fully funded PhD project
Occupational healthcare
Hybrid work environment
Postdoctoral researcher in the field of superconducting quantum circuits
Postdoctoral researcher in the field of superconducting quantum circuits

Aalto University Executive Education Oy • Espoo

On-site
EUR 47,000 - 52,000
Occupational healthcare
OtaNano facilities
Top locations