Electrical Engineer - Camera

Skydio

Tampere

On-site

EUR 55,000 - 75,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Stock options
Relocation assistance
Comprehensive benefits

Job summary

Skydio in Tampere, Finland seeks an experienced Electrical Engineer to design, bring up, test, and refine electronics for camera modules, gimbals, and imaging payloads. You’ll own circuits from schematic to production and collaborate with mechanical, optical, firmware, reliability, and manufacturing teams.

You’ll grow into broader ownership of camera electronics, performing detailed circuit design, layout, lab bring-up, and methodical debugging in a fast-paced product-development environment.

Qualifications

  • Master's degree in electrical engineering or related field, or equivalent practical experience.
  • 3+ years of industry experience designing electronics for physical products.
  • Hands-on experience taking boards from schematic capture through layout, bring-up, and debug.
  • Strong knowledge of power electronics, mixed-signal design, and digital interfaces (I2C, SPI, UART).
  • Proficient use of lab equipment (oscilloscopes, power supplies, electronic loads).
  • Ability to read datasheets, justify component choices, and document test methods clearly.
  • Detail-oriented, methodical debugging and failure analysis.
  • Ability to collaborate across mechanical, optical, firmware, reliability, manufacturing, and supplier teams.

Responsibilities

  • Design schematics and drive PCB, flex, and rigid-flex layouts for camera modules and related subsystems.
  • Design and integrate image sensors and camera interfaces (MIPI CSI-2).
  • Design power circuits for gimbals and cameras with tight thermal and space constraints.
  • Select components and qualify second sources and alternates.
  • Perform circuit analysis, power budgets, thermal estimates, and SI/PI considerations.
  • Collaborate with layout, fab, and suppliers on stackups, impedance, and DFM reviews.
  • Bring up new boards, write test plans, and characterize performance with lab equipment.
  • Design test fixtures and measurement setups for development and production testing.
  • Investigate failures and drive corrective actions; support EMC and reliability testing.
  • Work with firmware/software engineers on hardware interfaces and bring-up scripts.
  • Document decisions and test results in engineering reports; contribute to design reviews.

Skills

Circuit design
PCB layout
Power electronics
MIPI CSI-2 interfaces
I2C/SPI/UART
Lab bring-up
Schematic capture
Cadence OrCAD/Allegro
Test and measurement
Cross-functional collaboration

Education

Master's degree in Electrical Engineering
Equivalent practical experience

Tools

Cadence OrCAD/Allegro

Job description

Skydio is the leading US drone company and the world leader in autonomous flight, the key technology for the future of drones and aerial mobility. The Skydio team combines deep expertise in artificial intelligence, best-in-class hardware and software product development, operational excellence, and customer obsession to empower a broader, more diverse audience of drone users, from utility inspectors to first responders, soldiers in battlefield scenarios, and beyond.

About the role:

Skydio's cameras are critical to autonomous navigation, situational awareness, and capturing high-quality imagery in demanding environments. As an Electrical Engineer, you will design, bring up, test, and refine the electronics that let our camera modules, gimbals, and imaging payloads perform reliably in the field.

You will take ownership of circuits and boards, from schematic through bring-up and into production. You will work hands-on in the lab and collaborate closely with mechanical, optical, firmware, reliability, manufacturing, and supplier engineering teams. You will work alongside experienced engineers and grow into broader ownership of our camera electronics. This is an individual-contributor role for an engineer with a few years of product experience who enjoys detailed circuit design, careful layout, lab bring-up, and methodical debugging.

How you’ll make an impact:
  • Design schematics and drive PCB, flex, and rigid-flex layouts with the layout team for camera modules, gimbal electronics, sensor boards, and related subsystems.

  • Design and integrate image sensors, camera interfaces (e.g. MIPI CSI-2), and supporting electronics.

  • Design power circuits for gimbals and cameras, considering power sequencing and tight thermal and space constraints.

  • Select components against electrical, thermal, size, lifecycle, and supply-chain requirements, and qualify second sources and drop-in alternates.

  • Do the circuit analysis and simulation behind your designs, including power budgets, thermal estimates, signal and power integrity, and worst-case component tolerances.

  • Work with the layout team and fab vendors on stackups, impedance control, DFM feedback, and Gerber/working-data reviews for rigid and flexible circuits.

  • Bring up new boards, write test plans, and characterize performance using oscilloscopes, power analyzers, electronic loads, thermal cameras, and similar equipment.

  • Design test fixtures, tester and adapter boards, and measurement setups for camera development, validation, and production test.

  • Bring up quick-prototyped test circuits using local and subcontractor capabilities

  • Investigate electrical and electromechanical failures, find root causes, and help drive and verify corrective actions.

  • Support EMC, environmental, and reliability testing, including test setup, sample preparation, execution, data collection, and failure analysis.

  • Work with firmware and software engineers on hardware interfaces, register configuration, bring-up scripts, and debug.

  • Write clear engineering reports and contribute to design reviews that document decisions, test results, and open risks.

  • Contribute across the product cycle, from early concepts and prototypes through design validation, pre-production, and mass-production support.

What makes you a good fit:

You don't need experience in every area listed. We value strong fundamentals and a drive to learn the rest.

  • Master's degree in electrical engineering or a related discipline, or equivalent practical experience.

  • 3+ years of industry experience designing electronics for physical products.

  • Hands-on experience taking boards from schematic capture through layout, bring-up, and debug.

  • Good knowledge of power electronics, mixed-signal design, and digital interfaces such as I²C, SPI, and UART.

  • Practical lab skills with oscilloscopes, power supplies, electronic loads, and similar equipment. Ability to maintain and expand our electrical lab capability locally.

  • Ability to read datasheets carefully, justify component choices, and document test methods and results clearly.

  • A detail-oriented, methodical approach to debugging, characterization, and failure analysis.

  • Ability to work well across mechanical, optical, firmware, reliability, manufacturing, and supplier teams.

  • Curiosity, initiative, and a willingness to learn in a fast-paced product-development environment.

  • A strong interest in cameras, robotics, drones, or imaging systems.

  • Experience with Cadence OrCAD/Allegro or similar industry-standard tools.

  • Experience in communicating requirements clearly to suppliers throughout the project lifecycle.

Nice to have:
  • Experience designing flex or rigid-flex circuits, including stackups, impedance control, and DFM.

  • Experience with image sensors, MIPI camera interfaces, or camera modules.

  • Signal and power integrity analysis or simulation.

  • EMC, environmental, or reliability testing.

  • Experience on quick prototyping paths in electronics development.

  • Qualifying second sources or component alternates.

  • Scripting experience (e.g. Python) for test automation and data analysis.

Compensation:

At Skydio, our compensation packages include competitive base salaries, equity in the form of stock options, and comprehensive benefits packages. Compensation will vary based on factors, including skill level, proficiencies, transferable knowledge, and experience. Relocation assistance may also be provided for eligible roles. Fundamentally, we believe that equity is the key to long-term financial growth, and we ensure employees have the opportunity to significantly benefit from the company's success. Employees are entitled to statutory benefits in accordance with Finnish law. Additional benefits, if any, is determined by the Company’s policies and the terms of the employment contract.

#LI-TK1

At Skydio we believe that diversity drives innovation. We have created a multidisciplinary environment that embraces the power of diverse perspectives to create elegant solutions for complex problems. We are committed to growing our network of people, programs, and resources to nurture an inclusive culture.

Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or other characteristics protected by federal, state or local anti-discrimination laws.

For positions located in the United States of America, Skydio, Inc. uses E-Verify to confirm employment eligibility. To learn more about E-Verify, including your rights and responsibilities, please visit https://www.e-verify.gov/

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electrical Engineer - Camera
Electrical Engineer - Camera

Skydio • Tampere

On-site
EUR 81,000 - 134,000
Electrical Engineer - Camera
Electrical Engineer - Camera

Skydio • Finland

On-site
EUR 70,000 - 100,000
Electrical Engineer - Camera
Electrical Engineer - Camera

Skydio, Inc. • Tampere

Hybrid
EUR 65,000 - 95,000
Product Design Engineer - Camera
Product Design Engineer - Camera

Skydio, Inc. • Tampere

Hybrid
EUR 60,000 - 85,000
Senior/Staff Embedded Software Engineer - Camera Systems
Senior/Staff Embedded Software Engineer - Camera Systems

Perot Jain • Tampere

Hybrid
EUR 125,000 - 187,000
Camera & Imaging Intern
Camera & Imaging Intern

Skydio • Tampere

On-site
EUR 13,000 - 20,000
Camera & Imaging Intern
Camera & Imaging Intern

Precision Labs • Tampere

Hybrid
EUR 17,000 - 25,000
Senior/Staff Embedded Software Engineer - Camera Systems Software
Senior/Staff Embedded Software Engineer - Camera Systems Software

Frontdoor Defense • Tampere

On-site
EUR 90,000 - 140,000
Camera & Imaging Intern
Camera & Imaging Intern

Skydio, Inc. • Tampere

Hybrid
EUR 21,000 - 30,000
Drone Camera Electronics Engineer
Drone Camera Electronics Engineer

Skydio • Tampere

On-site
EUR 55,000 - 75,000
Stock options
Relocation assistance
Comprehensive benefits
Top locations