Senior Power Electronics Engineer

Harmattan AI

Lausanne

On-site

CHF 130,000 - 210,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Harmattan AI in Lausanne seeks a senior IC to own the analog power chain end-to-end across UXV platforms. You will drive motor-controller and DC-DC topology, MOSFET commutation, and lab validation, collaborating with embedded and propulsion teams to scale from prototype to production. This builder role ships hardware—not a pure research seat.

Fluency in English is required; French is a plus. The role is based in Lausanne, with a focus on high-power, high-density power electronics for autonomous

Qualifications

  • MSc or PhD in Electrical Engineering, Power Electronics, or equivalent.
  • 5+ years of hands-on R&D experience on motor drives, BLDC/PMSM controllers, or high-power-density power electronics.
  • Deep MOSFET commutation design expertise: gate-driver selection, dead-time tuning, switching transitions, loss budgets.
  • Ownership of at least one motor-controller PCBA shipped from prototype through production.
  • Fluency in simulation (LTspice, PLECS, or Simulink) and PCB design (Altium).
  • Strong EMI/EMC design and debug intuition.
  • Lab-bench discipline with hands-on debugging experience.
  • Comfort with scale-up and end-to-end ownership.
  • English fluent; French is a plus but not required.

Responsibilities

  • Power Stage Architecture: Lead motor-controller and DC-DC topology across platforms.
  • MOSFET Commutation & Gate-Drive Design: manage dead-time, gate shaping, and thermal trade-offs.
  • Multi-fidelity Simulation: perform analytic loss budgeting, LTspice, and system modelling.
  • BLDC Drive Stages: design three-phase inverters with sensing, protection, and FOC interfaces.
  • High-Power-Density PCBA: lead schematic/layout with thermal and EMC considerations.
  • EMI/EMC Engineering: drive pre-compliance and debugging under flight loads.
  • Prototype-to-Production: drive PCBAs through revision, DFM, and qualification.
  • Lab Validation: bench characterization and reconciliation with simulations.
  • Firmware & Controls Interface: collaborate on FOC tuning and sense calibration.
  • Design Authority & Mentorship: set design standards and mentor junior engineers.

Skills

5+ years hands-on R&D experience
MOSFET commutation design
Simulation and PCB design
Power electronics ownership
English fluent

Education

MSc or PhD in Electrical Engineering, Power Electronics, or equivalent

Tools

Altium
KiCad
LTspice
PLECS
Simulink

Job description

About Us

Harmattan AI is a next-generation defense prime building autonomous and scalable defense systems. Following the close of a $200M Series B, valuing the company at $1.4 billion, we are expanding our teams and capabilities to deliver mission-critical systems to allied forces.

Our work is guided by clear values: building technologies with real-world impact, pursuing excellence in everything we do, setting ambitious goals, and taking on the hardest technical challenges. We operate in a demanding environment where rigor, ownership, and execution are expected.

About the Role

Power electronics are the bottleneck on every next-generation UAS airframe we build: motor controllers, gate drivers, and DC-DC stages are what define flight time, payload, thermal envelope, and field reliability. We're looking for a senior IC to own the analog power chain end-to-end across our UXV platforms: from MOSFET commutation simulation through PCB layout to lab validation. You will be the technical reference on power electronics inside our Lausanne engineering hub, unblocking propulsion, airframe, and embedded teams in parallel as we scale from prototype cadence to multi-platform deployment.

This is a builder role, not a research seat. You ship hardware.

Responsibilities
  • Power Stage Architecture: Lead motor-controller and DC-DC topology across fixed-wing, multicopter, and hybrid UXV platforms. Translate mission constraints into power-chain specification.

  • MOSFET Commutation & Gate-Drive Design: Own the analog switching design: dead-time tuning, gate shaping, switching-loss vs EMI vs thermal trade-offs.

  • Multi-fidelity Simulation: Deploy the full stack: analytical loss budgeting, transient SPICE (LTspice), system-level modelling in PLECS or Simulink.

  • BLDC Drive Stages: Design three-phase inverters with integrated current sensing, protection, Trapezoidal and FOC-aware hardware interfaces.

  • High-Power-Density PCBA: Lead schematic and layout in Altium or KiCad with thermal, parasitics, and EMC engineered in from the first revision.

  • EMI / EMC Engineering: Drive pre-compliance, filter design, and root-cause debug under flight-representative loads.

  • Prototype-to-Production: Take motor-controller PCBAs through revision discipline, DFM, and qualification - closing the loop on field returns.

  • Lab Validation: Execute bench characterization (power analysers, oscilloscopes, thermal imaging, double-pulse testing) and reconcile against simulation.

  • Firmware & Controls Interface: Partner with embedded and propulsion on FOC tuning, current-sense calibration, and the hardware/firmware compensation boundary.

  • Design Authority & Mentorship: Set the bar via design-decision records and reference designs. Mentor 1–2 junior engineers.

Candidate Requirements
  • MSc or PhD in Electrical Engineering, Power Electronics, or equivalent.

  • 5+ years of hands-on R&D experience on motor drives, BLDC/PMSM controllers, or high-power-density power electronics.

  • Deep working mastery of MOSFET commutation design: gate-driver selection, dead-time tuning, switching transitions, loss budgets.

  • Proven ownership of at least one motor-controller PCBA shipped from prototype through production (or pre-production qualification): ideally on drone, robotics, eVTOL, or automotive platforms.

  • Fluency in simulation (LTspice, PLECS, or Simulink) and PCB design (Altium).

  • Strong, hard-earned intuition for EMI / EMC design and debug.

  • Lab-bench discipline: you've personally debugged what simulation missed.

  • Comfort with scale-up iteration speed and end-to-end ownership.

  • English fluent (working language); French is a nice-to-have, not a requirement.

Bonus points for: GaN / SiC experience, safety-critical design exposure , applied control theory implemented in hardware, exposure to defense, aerospace, or UAS programmes.

We look forward to hearing how you can help shape the future of autonomous defense systems at Harmattan AI.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Mechanical Engineer – Quadcopter Systems
Senior Mechanical Engineer – Quadcopter Systems

Harmattan AI • Lausanne

On-site
CHF 120,000 - 170,000
Complete System Ownership
Unmatched Execution Speed
Direct Mission Impact
+1
Senior Power Electronics Engineer: UAV Motor Drives
Senior Power Electronics Engineer: UAV Motor Drives

Harmattan AI • Lausanne

On-site
CHF 130,000 - 210,000
System Identification Engineer
System Identification Engineer

Deeptech Insider • Lausanne

On-site
CHF 110,000 - 170,000
System Identification Engineer
System Identification Engineer

Harmattan AI • Lausanne

On-site
CHF 110,000 - 170,000
Senior Electrical Engineer
Senior Electrical Engineer

Harmattan AI • Lausanne

On-site
CHF 120,000 - 180,000
Embedded Electrical Engineer - SoM
Embedded Electrical Engineer - SoM

Harmattan AI • Lausanne

On-site
CHF 120,000 - 180,000
Senior Analog & Power Electronics Engineer (High-Current)
Senior Analog & Power Electronics Engineer (High-Current)

Inautalent • Unterwallis

On-site
CHF 120,000 - 170,000
Power Electronics Engineer
Power Electronics Engineer

MagnebotiX AG • Zürich

Hybrid
CHF 20,000 - 27,000
Senior Analog & Power Electronics Hardware Engineer
Senior Analog & Power Electronics Hardware Engineer

INAUTALENT • Unterwallis

On-site
CHF 120,000 - 170,000
Embedded Software Engineer - SoM
Embedded Software Engineer - SoM

Harmattan AI • Lausanne

On-site
CHF 120,000 - 180,000
Top locations