Structure Design Engineer

Infosys Limited; Montreal (administrative region); On-site; CAD 90,000 - 130,000; Full time

Job summary

Infosys Limited in Montreal, Mirabel is seeking a Structure Design Engineer to lead and support aerospace structural design for the A220 family. The role requires collaboration with offshore teams, adherence to Airbus processes, and strong experience in design verification and certification.

The ideal candidate holds a aerospace/ mechanical engineering degree and 5–10 years of hands-on experience, with familiarity in DMU reviews and multi-partner environments.

Qualifications

• Bachelor’s degree in aerospace/mechanical engineering or equivalent.
• 5–10 years hands-on aerospace structural design experience.
• Proven experience on Airbus aircraft programs is preferred.

Responsibilities

• Provide engineering support for the A220 family (A220-100 and A220-300).
• Manage modification processes through DGs, including PDR and CDR.
• Collaborate with offshore team for clear technical guidance and deliverables.
• Lead and support structural design in line with Airbus processes and standards.
• Review 3D models, drawings, and BOMs for regulatory and project compliance.
• Provide expertise in structures, materials, stress sizing, and certification constraints.
• Support process improvements and cost-reduction initiatives.
• Drive issue resolution with cross-functional teams (stress, manufacturing, quality, config mgmt).
• Ensure adherence to DMU/PLM and configuration control processes.

Skills

Aerospace structural design

Stress sizing

Cross-functional collaboration

Design verification & certification

Knowledge of DMU/PLM processes

A220 design principles

Manufacturing considerations

3D/2D drawings review

DV/DAA compliance

Aerospace project experience

Education

BE / BTECH / MTECH / MS in Aerospace/Mechanical Engineering

5–10 years aerospace structural design experience

Tools

CATIA v5

Datalink

ICMS

eRoom

ERD

BNet

ENOVIA

HMS

Job description

Infosys is hiring Structure Design Engineer in Montreal, Mirabel

Required Qualifications:

Candidate must be located within commuting distance of Montreal, Canada or be willing to relocate to the area. This position may require travel in Canada.

Bachelor’s degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education.

At least 4 years of Information Technology experience.

Candidates authorized to work for any employer in the Canada without employer-based visa sponsorship are welcome to apply. Infosys is unable to provide immigration sponsorship for this role at this time.

Required Skills:

• Development, qualification, certification, and in-service support of A220 Family airframe components.
• Drawing/modsum/EDRN creation, ICD/WPICD updates, and SWAP incorporation for A220 airframe components
• A220 design RFC, PCR and Engineering investigation support.
• Knowledge of Airbus Canada specifications and airworthiness requirements.
• Knowledge of metallic and composite design principles.
• Knowledge of Airbus processes and procedures relating to design.
• Experience of using Airbus Supply (DocMaster, Airnavx etc.).
• Ability to perform Design Validation (DV) and ensure Design Authority (DAA) requirements are met.
• Experience in DMU reviews and multi partner environments.
• Tools CATIAv5, Datalink, ICMS, eRoom, ERD, BNet, ENOVIA, HMS

Responsibilities:

• Capability to provide engineering support for the A220 Family (A220-100 and A220-300).
• Ability to manage modification processes through Decision Gates (DG) including Preliminary Design Review (PDR) and Critical Design Review (CDR).
• Collaborate closely with the offshore engineering team, ensuring clear technical communication, timely guidance, and smooth execution of deliverables.
• Lead and support the structural design and development of components in accordance with Airbus processes, methods, and standards.
• Solid understanding of aerospace design principles, airworthiness constraints, and manufacturing processes.
• Review and validate design outputs such as 3D models, 2D drawings, and Bill Of Material to ensure compliance with project requirements.
• Provide technical expertise on structures, materials, stress sizing, manufacturing considerations, and certification constraints.
• Providing support to other general design activities, e.g. Process improvements, cost reduction etc.
• Drive issue resolution by interfacing with cross functional teams (stress, manufacturing, quality, configuration management, etc.).
• Ensure adherence to Airbus DMU, PLM, and configuration control processes.
• Prepare and deliver design reviews (Maturity phases, PDR, CDR, DFM).
• Manage engineering data, documentation, and deliverables in compliance with quality and configuration requirements.
• Support digital continuity initiatives and contribute to continuous improvement in design and communication processes.

Required Qualifications (Non-negotiable requirements)

• BE / BTECH/MTECH/MS or equivalent degree (Aerospace/ Mechanical Engineering)
• 5–10 years of hands on experience in aerospace structural design.
• Proven experience working on Airbus aircraft programs.

Infosys recrute un Ingénieur Conception Structure à Montréal, Mirabel

Compétences requises

• Diplôme de baccalauréat ou équivalent étranger obtenu auprès d’un établissement accrédité.
• Au moins 4 ans d’expérience en technologies de l’information.
• Les candidats autorisés à travailler pour tout employeur au Canada sans parrainage de visa sont encouragés à postuler. Infosys n’est pas en mesure de fournir un parrainage d’immigration pour ce poste actuellement.
• Le candidat doit résider à une distance de déplacement raisonnable de Mississauga (Ontario) ou Montréal, ou être disposé à s’y relocaliser. Ce poste implique des déplacements.

Compétences techniques

• Développement, qualification, certification et soutien en service des composants de la structure de la famille A220.
• Création de dessins/modsums/EDRN, mises à jour ICD/WPICD et intégration SWAP pour les composants de la structure A220.
• Support pour les RFC, PCR et enquêtes d’ingénierie sur la conception A220.
• Connaissance des spécifications d’Airbus Canada et des exigences de navigabilité.
• Connaissance des principes de conception métalliques et composites.
• Connaissance des procédés et procédures Airbus liés à la conception.
• Expérience avec Airbus Supply (DocMaster, AirnavX, etc.).
• Capacité à effectuer la Validation de Conception (DV) et à garantir le respect des exigences de l’Autorité de Conception (DAA).
• Expérience en revues DMU et environnements multipartenaires.

Outils :

CATIA v5, Datalink, ICMS, eRoom, ERD, BNet, ENOVIA, HMS

Description du poste

• Capacité à fournir un soutien en ingénierie pour la famille A220 (A220‑100 et A220‑300).
• Capacité à gérer les processus de modification via les Decision Gates (DG) incluant les revues de conception préliminaire (PDR) et critiques (CDR).
• Collaboration étroite avec l’équipe d’ingénierie offshore, assurant une communication technique claire, des orientations rapides et une exécution fluide des livrables.
• Diriger et soutenir la conception et le développement structurel des composants conformément aux processus, méthodes et normes Airbus.
• Solide compréhension des principes de conception aéronautique, des contraintes de navigabilité et des procédés de fabrication.
• Examiner et valider les livrables de conception tels que modèles 3D, dessins 2D et nomenclatures (BOM) afin d’assurer leur conformité aux exigences du projet.
• Fournir une expertise technique en structures, matériaux, dimensionnement, fabrication et contraintes de certification.
• Soutenir diverses activités générales de conception, par ex. amélioration des processus, réduction des coûts, etc.
• Favoriser la résolution de problèmes en collaborant avec des équipes transversales (analyse, fabrication, qualité, gestion de configuration, etc.).
• Assurer le respect des processus DMU, PLM et de contrôle de configuration d’Airbus.
• Préparer et présenter les revues de conception (maturité, PDR, CDR, DFM).
• Gérer les données d’ingénierie, la documentation et les livrables conformément aux exigences de qualité et de configuration.
• Soutenir les initiatives de continuité numérique et contribuer à l’amélioration continue des processus de conception et de communication.

Qualifications requises (non négociables)

• BE / BTECH / MTECH / MS ou diplôme équivalent (génie aéronautique ou mécanique).
• 5 à 10 ans d’expérience pratique en conception structurelle aérospatiale.
• Expérience avérée sur des programmes aéronautiques Airbus.

About Us

Infosys is a global leader in next-generation digital services and consulting. We enable clients in more than 50 countries to navigate their digital transformation. With over four decades of experience in managing the systems and workings of global enterprises, we expertly steer our clients through their digital journey. We do it by enabling the enterprise with an AI-powered core that helps prioritize the execution of change. We also empower the business with agile digital at scale to deliver unprecedented levels of performance and customer delight. Our always-on learning agenda drives their continuous improvement through building and transferring digital skills, expertise, and ideas from our innovation ecosystem.

EEO

Infosys provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability.