Staff RF Engineer

Remote Robotic

Ottawa

On-site

CAD 110,000 - 160,000

Full time

4 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Equity participation
Competitive benefits
Direct hardware access
Small multidisciplinary team

Job summary

Remote Robotic Systems seeks a Staff RF Engineer to own RF design across architecture, schematic, PCB layout, and production. You will drive power amplifier design and RF chains up to 8.5 GHz, validate performance, and collaborate closely with hardware and software teams from concept to working hardware.

You will contribute to pre-compliance efforts and support certification activities while delivering robust, reliable RF solutions in a small, fast-moving team in Kanata.

Qualifications

  • Bachelor's degree in Electrical Engineering or related field.
  • 5+ years of professional RF hardware design experience from concept to tested hardware or production.
  • Strong RF design experience up to 8.5 GHz with RF transmit/receive chains.
  • Hands-on power-amplifier design experience.
  • Experience with RF schematic capture and PCB layout in Altium, KiCad, or similar.
  • Proficiency with RF lab equipment (VNA, spectrum analyzer, signal generator, power meters).
  • Knowledge of RF simulation/EM tools (ADS, AWR, HFSS, Sonnet).
  • Experience supporting EMC, regulatory, or certification activities.
  • Ability to work on-site in Kanata, Ontario.

Responsibilities

  • Define RF architectures and link budgets; optimize gain and dynamic range.
  • Design full transmit/receive chains and RF subsystems up to 8.5 GHz.
  • Layout RF PCBs with controlled impedance and proper isolation.
  • Lead testing: RF board bring-up, measurements, and characterization.
  • Support calibration, production tests, and QA handoffs.
  • Collaborate with hardware, software, mechanical, and manufacturing teams.

Skills

RF design
Power amplifier design
Schematic capture
PCB layout
RF lab equipment
RF simulation tools
Regulatory/EMC experience
GNSS resilience
On-site work

Education

Bachelor's degree in Electrical Engineering or related field

Tools

Altium
KiCad
ADS
AWR
HFSS
Sonnet

Job description

About Remote Robotic Systems

Help build advanced systems operating at the intersection of aerospace, robotics, and defence technology. Remote Robotic Systems (RRS) is a Canadian robotics and defence‑tech company helping organizations deploy enterprise‑grade drones, uncrewed aircraft, robotic platforms, sensors, payloads, and remote operations technologies for mission‑critical applications. Our solutions support customers across defence, public safety, security, industrial, infrastructure, energy, and government sectors.

About Remote Robotic Systems

Help build advanced systems operating at the intersection of aerospace, robotics, and defence technology. Remote Robotic Systems (RRS) is a Canadian robotics and defence‑tech company helping organizations deploy enterprise‑grade drones, uncrewed aircraft, robotic platforms, sensors, payloads, and remote operations technologies for mission‑critical applications. Our solutions support customers across defence, public safety, security, industrial, infrastructure, energy, and government sectors.

Through our Airmetal team, we develop advanced aerospace, communications, and autonomous systems designed for demanding real‑world environments. We are a small, fast‑moving engineering team that values ownership, technical depth, practical problem solving, and the ability to turn ambitious ideas into working hardware.

The Role

Airmetal is looking for a Staff RF Engineer to lead the RF design of our communications hardware. This role spans the full RF lifecycle, from architecture and link‑budget development through schematic capture, PCB layout, lab characterization, compliance testing, and production support. You will define transmit and receive chains, design and tune power‑amplifier systems up to 8.5 GHz, and help determine how our products communicate reliably in demanding operating environments. This is a hands‑on role with meaningful ownership over architecture decisions. You will work closely with hardware and software teams and see your designs move quickly from concept to working hardware. We are looking for an engineer who enjoys solving difficult RF problems, trusts measurements over assumptions, and wants to play a central role in building products from the ground up.

What You Will Work On
RF Architecture and Design
  • Define RF architectures, including link budgets, sensitivity, dynamic range, gain distribution, component selection, and system‑level trade‑offs.
  • Design complete transmit and receive chains, including power amplifiers, LNAs, mixers, filters, synthesizers, matching networks, biasing, protection, and thermal considerations.
  • Develop and optimize radio systems operating up to 8.5 GHz for demanding operating environments.
  • Capture schematics and lay out RF PCBs using controlled‑impedance routing, grounding, shielding, and isolation between sensitive blocks.
  • Support antenna selection, integration, matching, and performance characterization.
Testing, Compliance, and Production
  • Bring up and validate RF boards using measurements such as output power, gain, efficiency, EVM, ACLR, spurious emissions, noise figure, return loss, and stability.
  • Use simulation and EM tools where they add value and reconcile model results with bench measurements.
  • Lead RF troubleshooting and root‑cause analysis.
  • Support pre‑compliance activities and work with external laboratories through FCC and ISED certification.
  • Define calibration, production test, and troubleshooting approaches that can scale beyond a single prototype.
Technical Leadership
  • Review RF‑critical designs and share practical RF knowledge across the engineering team.
  • Partner with hardware, software, mechanical, and manufacturing teams on RF‑related design decisions.
What You Bring
  • Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical discipline, or equivalent demonstrated experience.
  • 5+ years of professional RF hardware design experience, including ownership from concept through tested hardware or production.
  • Strong RF design experience at frequencies up to 8.5 GHz and demonstrated ownership of RF transmit and receive chains.
  • Hands‑on power‑amplifier design experience.
  • Direct experience with RF schematic capture and PCB layout in Altium, KiCad, or a comparable tool.
  • Fluency with common RF laboratory equipment, including a vector network analyzer, spectrum analyzer, signal generator, and power measurement equipment.
  • Working knowledge of RF simulation or EM tools such as ADS, AWR, HFSS, Sonnet, or similar.
  • Experience supporting EMC, regulatory, or certification activities.
  • Ability to work on‑site in Kanata, Ontario.
Nice to Have
  • Experience with power‑amplifier designs above 10 W.
  • Antenna design and chamber‑measurement experience.
  • GaN or LDMOS design, digital predistortion, envelope tracking, or other power‑amplifier linearization techniques.
  • Mixed‑signal or high‑speed digital hardware design alongside RF.
  • Python, C, or C++ for automated RF characterization.
  • Experience creating production RF calibration and test strategies.
  • Experience in UAVs, robotics, aerospace, defence, wireless communications, or ruggedized products.
  • Experience designing RF links for congested, high‑interference spectrum.
  • Experience with GNSS resilience or navigation in GNSS‑degraded environments.
What Will Make You Successful
  • You move comfortably between architecture, simulation, layout, and the bench.
  • You understand when a measurement is misleading and know how to isolate the cause.
  • You make technical trade‑offs using data and communicate them clearly across disciplines.
  • You take ownership through validation, compliance, and production handoff.
  • You enjoy working in a highly collaborative environment where designs evolve quickly.
What We Offer
  • Meaningful ownership of technically challenging work from architecture through validation and production.
  • Direct access to the hardware, lab equipment, and teammates needed to solve problems quickly.
  • A small, multidisciplinary environment where your work is visible and your technical judgment matters.
  • Competitive compensation, benefits, and equity participation.
Additional Employment Information
  • Security clearance: Some roles are conditional on the ability to obtain and maintain the required security clearance.
  • Use of AI in hiring: We may use AI tools to help with parts of our hiring process, such as reviewing applications, screening resumes, and evaluating candidate responses. These tools support our team, but people make all hiring decisions. AI is used to assist, not replace, human judgment.

Remote Robotic Systems is an equal opportunity employer. If you require accommodation during the recruitment process, please let us know.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Staff Mechanical Engineer
Staff Mechanical Engineer

Remote Robotic Systems Inc. • Ottawa

On-site
CAD 115,000 - 135,000
Equity participation
Benefits
Hardware Test Engineer
Hardware Test Engineer

AirMetal • Ottawa

On-site
CAD 90,000 - 125,000
Hardware Test Engineer
Hardware Test Engineer

Remote Robotic • Ottawa

On-site
CAD 90,000 - 120,000
Competitive compensation
Benefits
Equity participation
Senior Mechanical Engineer - Aero & Propulsion
Senior Mechanical Engineer - Aero & Propulsion

Remote Robotic Systems Inc. • Ottawa

On-site
CAD 95,000 - 120,000
Equity participation
Benefits
Competitive compensation
Android & Robotics Software Developer
Android & Robotics Software Developer

Remote Robotic • Ottawa

On-site
CAD 55,000 - 76,000
Radio Frequency Hardware Designer
Radio Frequency Hardware Designer

Octasic • Montreal

On-site
CAD 85,000 - 120,000
Performance bonus
Employee share purchase program
Comprehensive insurance (medical, dent
+7
RF Hardware Developer (ULF/VLF)
RF Hardware Developer (ULF/VLF)

Syntronic - A Global Design House • Ottawa

On-site
CAD 126,000 - 188,000
RF Systems Engineer
RF Systems Engineer

PheedLoop Inc. • Toronto

On-site
CAD 80,000 - 100,000
Senior RF Engineer - 8.5 GHz, End-to-End Ownership
Senior RF Engineer - 8.5 GHz, End-to-End Ownership

Remote Robotic • Ottawa

On-site
CAD 110,000 - 160,000
Equity participation
Competitive benefits
Direct hardware access
+1
Android & Robotics Software Developer
Android & Robotics Software Developer

Remote Robotic Systems Inc. • Ottawa

On-site
CAD 55,000 - 76,000