Senior RF Engineer- Job Stage5- ERCSJP00075104

emergiTEL Inc.

Mississauga

On-site

CAD 90,000 - 94,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Ericsson in Mississauga, Canada, seeks a Senior RF / Safety Code 6 Compliance Engineer to prepare and review SC6 assessments for wireless network deployments across Canada.

You will perform RF exposure modelling, develop mitigation measures, review field surveys, and ensure compliance with regulatory requirements; PE licensure in Canada is required.

Qualifications

  • Bachelor’s degree in Electrical Engineering, Telecommunications Engineering, Wireless Communications, or a closely related engineering discipline.
  • Active Professional Engineer, P.Eng., registration with a Canadian provincial or territorial engineering regulator
  • Active registration with APEGA, EGBC, or both is strongly required for work performed in Alberta and British Columbia.
  • Ability to obtain additional provincial registration where required by the assigned work.
  • Demonstrated experience in RF engineering, electromagnetic exposure, wireless network compliance, or radio-network design.
  • Hands-on experience preparing or independently reviewing Safety Code 6 assessments and reports.
  • Strong knowledge of LTE and 5G NR radio systems.
  • Experience reviewing RF planning specifications, Final Cell Designs, civil drawings, surveys, and as-built documentation.
  • Ability to independently assess engineering work produced by internal teams and third-party engineering organizations.
  • Strong technical-writing, calculation, quality-review, and document-control skills.
  • Eligibility to work in Canada.

Responsibilities

  • Prepare, review, revise, and approve Safety Code 6 assessments and reports.
  • Perform RF exposure analysis for macro towers, rooftops, monopoles, colocation sites, utility-owned sites, and other wireless site configurations.
  • Develop RF exposure mitigation measures, including signage, access restrictions, barriers, exclusion areas, antenna relocation, height changes, power limitations, or configuration changes.
  • Determine whether changes to antennas, radios, power, frequency, height, azimuth, tilt, or site geometry require an SC6 revision.
  • Review SC6 surveys, installation records, antenna photographs, height measurements, and azimuth-orientation reports.
  • Validate the installed configuration against the approved SC6 report and RF design.
  • Review SC6 work produced by Ericsson teams, subcontractors, and third-party engineering providers.
  • Resolve technical comments, customer rejections, compliance issues, and cross-document discrepancies.
  • Maintain engineering calculations, assumptions, review records, revision history, approval evidence, and professional-authentication records.
  • Support professional engineering reviews, audits, corrective actions, and quality-management activities.
  • Provide technical guidance and coaching to SC6 analysts and RF engineers.
  • Support root-cause analysis for rejected reports and recurring quality issues.
  • Monitor first-time-right performance, defects, rework, review compliance, and report cycle time.

Skills

RF engineering
Safety Code 6
LTE knowledge
5G NR
Technical writing
Quality review

Education

Bachelor’s degree in Electrical Engineering

Tools

RF exposure modelling tools

Job description

Senior RF Engineer- Job Stage5- ERCSJP00075104

Senior RF / Safety Code 6 Compliance Engineer
Rate Range: 65-68$/hr

Description

Ericsson is seeking a Senior RF / Safety Code 6 Compliance Engineer to prepare, independently review, and support the professional approval of RF exposure-compliance deliverables for wireless network deployment and modernization programs across Canada.

The role will focus on Safety Code 6 analysis, RF exposure modelling, compliance reporting, mitigation design, engineering quality review, installation verification, and technical governance for Radio Uplift and New Site Build projects.

The selected candidate must be a licensed Professional Engineer in Canada and have practical experience completing or reviewing Safety Code 6 assessments for wireless communication sites.

Key Responsibilities
  • Prepare, review, revise, and approve Safety Code 6 assessments and reports.
  • Perform RF exposure analysis for macro towers, rooftops, monopoles, colocation sites, utility-owned sites, and other wireless site configurations.
  • Develop RF exposure mitigation measures, including signage, access restrictions, barriers, exclusion areas, antenna relocation, height changes, power limitations, or configuration changes.
  • Determine whether changes to antennas, radios, power, frequency, height, azimuth, tilt, or site geometry require an SC6 revision.
  • Review SC6 surveys, installation records, antenna photographs, height measurements, and azimuth-orientation reports.
  • Validate the installed configuration against the approved SC6 report and RF design.
  • Review SC6 work produced by Ericsson teams, subcontractors, and third-party engineering providers.
  • Resolve technical comments, customer rejections, compliance issues, and cross-document discrepancies.
  • Maintain engineering calculations, assumptions, review records, revision history, approval evidence, and professional-authentication records.
  • Support professional engineering reviews, audits, corrective actions, and quality-management activities.
  • Provide technical guidance and coaching to SC6 analysts and RF engineers.
  • Support root-cause analysis for rejected reports and recurring quality issues.
  • Monitor first-time-right performance, defects, rework, review compliance, and report cycle time.
Mandatory Qualifications
  • Bachelor’s degree in Electrical Engineering, Telecommunications Engineering, Wireless Communications, or a closely related engineering discipline.
  • Active Professional Engineer, P.Eng., registration with a Canadian provincial or territorial engineering regulator
  • Active registration with APEGA, EGBC, or both is strongly required for work performed in Alberta and British Columbia.
  • Ability to obtain additional provincial registration where required by the assigned work.
  • Demonstrated experience in RF engineering, electromagnetic exposure, wireless network compliance, or radio-network design.
  • Hands-on experience preparing or independently reviewing Safety Code 6 assessments and reports.
  • Strong knowledge of LTE and 5G NR radio systems.
  • Experience reviewing RF planning specifications, Final Cell Designs, civil drawings, surveys, and as-built documentation.
  • Ability to independently assess engineering work produced by internal teams and third-party engineering organizations.
  • Strong technical-writing, calculation, quality-review, and document-control skills.
  • Eligibility to work in Canada.
Preferred Qualifications
  • Active P.Eng. registration with both APEGA and EGBC.
  • Experience supporting a Permit to Practice or professional engineering quality-management system.
  • Experience authenticating professional work products or validating engineering documents.
  • Experience reviewing engineering work produced by subcontractors or outsourced engineering organizations.
  • Experience with Canadian wireless operators and Canadian RF exposure requirements.
  • Experience with Rogers network configurations, RF standards, and SC6 requirements.
  • Experience with RF exposure or electromagnetic-field modelling tools.
  • Experience with macro towers, rooftops, utility-owned sites, colocation sites, multibeam antennas, canister antennas, and active antenna systems.
  • Knowledge of Ericsson radios, AIR products, antennas, and baseband configurations.
  • Experience coordinating professional engineering review and stamping.
  • French-language capability and OIQ registration are required for work involving Quebec.
Important Certification Requirement

Applicants must hold active P.Eng. registration with a Canadian provincial or territorial engineering regulator.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

RF SC6 Design Engineer
RF SC6 Design Engineer

emergiTEL • Canada

Remote
CAD 90,000 - 130,000
Senior RF Engineer- Job Stage5- ERCSJP00074594
Senior RF Engineer- Job Stage5- ERCSJP00074594

emergiTEL Inc. • Mississauga

On-site
CAD 83,000 - 90,000
RQ08478 - Data Architect/Modeller - Senior
RQ08478 - Data Architect/Modeller - Senior

Rubicon Path • Toronto

Hybrid
CAD 90,000 - 120,000
RF Engineer
RF Engineer

Tridon Communications • Calgary, Edmonton

On-site
CAD 90,000 - 120,000
Lead RF Engineer
Lead RF Engineer

Novus Technical Services • Calgary

On-site
CAD 120,000 - 160,000
Health & dental plans
RRSP matching
Life & AD&D insurance
+4
5G RAN Verification Engineer
5G RAN Verification Engineer

Ericsson • Ottawa

On-site
CAD 102,000 - 133,000
Wireless Network Engineer
Wireless Network Engineer

ELITS • Mississauga

On-site
CAD 90,000 - 150,000
Head of Product Engineering Group 4
Head of Product Engineering Group 4

Ericsson • Ottawa

On-site
CAD 204,000 - 267,000
Radio SW DevEnv AI Developer
Radio SW DevEnv AI Developer

Ericsson • Ottawa

On-site
CAD 82,000 - 90,000
Medical & dental benefits
RRSP matching
Vacation & leave
+3
RAN System Verification Professional Ottawa,Ontario,Canada Product Development Flexible Location Posted 9 hours ago
RAN System Verification Professional Ottawa,Ontario,Canada Product Development Flexible Location Posted 9 hours ago

Ericsson AB • Ottawa

Hybrid
CAD 85,000 - 111,000
Annual bonus
Health benefits
Pension plan
+2