Mechanical Engineering Co-Op Student

PV Labs

Burlington

On-site

CAD 25,000 - 39,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

4‑day work week
Hands-on hardware experience

Job summary

PVLabs is seeking a third-year Mechanical Engineering co-op student to contribute to components, fixtures and small assemblies for airborne systems. You will learn CAD practices, perform engineering calculations and participate in design reviews with guidance from experienced engineers.

You will apply mechanics, heat transfer and dynamics fundamentals to practical design questions, while documenting results and supporting prototype builds.

Qualifications

  • Entering or completing third year in Mechanical Engineering and eligible for a co-op placement.
  • Strong fundamentals in mechanics, materials and engineering mathematics.
  • Experience with SolidWorks or equivalent CAD software.
  • Experience designing, building, testing or troubleshooting physical systems.
  • Ability to explain contributions and design choices and how results were checked.
  • Careful work habits and willingness to check results before review.
  • Initiative to learn unfamiliar material and apply feedback.
  • Honest communication and seeking review before making changes.

Responsibilities

  • Learn products, CAD/drawing practices, manufacturing methods and safety requirements.
  • Carry smaller assignments from requirements through design and verification with guidance.
  • Deliver a completed engineering work with clear drawings and handover.
  • Explain design choices and testing performed during reviews.
  • Collaborate with technicians and engineers to ensure success.

Skills

SolidWorks
Mechanics fundamentals
Heat transfer & dynamics

Education

Third-year Mechanical Engineering
Co-op eligible

Tools

CAD software

Job description

Mechanical Engineering Co-op
Airborne Optical Systems | Third-Year University Student

Burlington, ON

Candidates must be eligible to meet the requirements of Canada’s Controlled Goods Program under the Defence Production Act and obtain and maintain the security clearances required for their work. If unsure about your eligibility, consult the Government of Canada website HERE.

About the Role

At PVLabs, a mechanical design has to work beyond the screen. It must support an optical alignment, accommodate motion, manage heat or survive vibration—and still make sense to the person building it. You will learn how those demands shape the decisions behind a part, an assembly and a complete airborne system.

We build advanced imaging systems that bring mechanics, optics, electronics, controls and software together into stabilized airborne capability. We are seeking a third-year Mechanical Engineering co-op student ready to put strong fundamentals to work on real hardware.

You will contribute to components, fixtures, small assemblies, engineering calculations and test activities within clearly defined assignments. Experienced engineers will guide and review your work, while expecting you to arrive prepared, think through problems and act on feedback.

This will be a demanding placement. You will encounter problems without a textbook answer, competing constraints and decisions that affect someone else’s work. The opportunity is to learn more deeply and across more disciplines than a classroom or isolated design project can offer—and demonstrate that learning in hardware you can build, measure and improve.

About the Responsibilities
Starting now:

Learn our products, CAD and drawing practices, manufacturing methods and safety requirements. Take on a defined design, fixture or test assignment, and learn to explain your assumptions, check your work and prepare for review.

As you gain familiarity:

Carry smaller assignments from requirements through design, review and physical verification, with guidance at key decisions. Seek input from technicians and engineers, incorporate feedback and connect your calculations to what happens at the bench.

By the end of your term:

Deliver a completed piece of engineering work with clear drawings, supporting evidence and a useful handover. You should be able to explain what you designed, why you made those choices, how it was checked and what you would improve next time.

About the Details
  • Develop concepts, CAD models and drawings for assigned parts, fixtures and small assemblies within established requirements.
  • Apply materials, mechanics, heat transfer and dynamics fundamentals to practical design questions, with support from experienced engineers.
  • Complete engineering calculations and introductory analysis, checking units, loads, assumptions and whether the results make physical sense.
  • Learn to apply datum structures, GD&T and basic tolerance stacks with attention to assembly, alignment and inspection.
  • Consider manufacturing processes, tool access, fastening, cable clearance and service needs before a design reaches the shop floor.
  • Support prototype builds, fit checks, measurements and tests; compare actual behaviour with your predictions.
  • Investigate bounded mechanical problems using observations and evidence, and verify proposed corrections with your supervisor.
  • Keep models, drawings, calculations and test records organized so others can review and use them.
  • Break assignments into achievable steps, provide estimates and raise questions or delays while there is still time to respond.
  • Participate in design reviews, explain your reasoning and show how feedback has improved the next iteration.
Key Requirements
  • Entering or completing third year in Mechanical Engineering, or a closely related university engineering program, and eligible for a co-op placement.
  • Strong foundations in mechanics, materials and engineering mathematics, with the ability to apply them beyond a familiar classroom example.
  • Working capability in SolidWorks or comparable three-dimensional CAD software, including parts, assemblies and basic drawings.
  • Evidence of designing, building, testing or troubleshooting something physical through coursework, a student team, previous employment or a personal project.
  • The ability to explain your contribution, your design choices and something that did not work as expected.
  • Careful work habits and a willingness to check your own results before submitting them for review.
  • Initiative in learning unfamiliar material, asking focused questions and applying feedback.
  • Honest communication about progress and uncertainty, and the judgment to seek review before making consequential changes.

We do not expect professional-level judgment on day one. We do expect you to think, prepare and become more capable as the term progresses.

Key Nicetohavements
  • Participation in Formula SAE, robotics, aerospace or another student design-and-build team.
  • Machining, fabrication, additive manufacturing, assembly or measurement experience.
  • Exposure to GD&T, tolerance analysis, FEA or thermal analysis.
  • Projects involving mechanisms, motors, sensors, cameras or other integrated hardware.
  • Python, MATLAB or similar tools used for calculations or test-data analysis.
About You as a Mechanical Engineering Co-op Student

You are curious enough to ask why something works and practical enough to build or test your explanation. You may already spend time making, repairing or taking things apart. What matters is that you learn from the result.

You want a placement that stretches you. You can accept a challenge to your design, admit when you do not understand something and return with a better answer. You respect the experience of the technician assembling your part as much as the engineer reviewing it.

You take ownership of the work within your reach. You follow through, keep people informed and leave your assignments in a condition someone else can understand and build on.

What’s in It for You?

PVLabs is where engineering fundamentals meet hardware that has to perform. You’ll work alongside experienced engineers and technicians, see your designs become physical parts, and learn how mechanical decisions affect optics, stabilization, electronics and manufacturing.

The learning will be broad, practical and sometimes uncomfortable—in the useful way that comes from discovering what you do not yet know and working through it. You will have access to people who can help, and meaningful work that gives you a reason to ask better questions.

We run on autonomy, mastery, and purpose—with a year-round 4-day, 32-hour work week and performance over presence. This hands-on placement is centred on our Burlington engineering, assembly and test facilities.

If you want to finish your co-op with stronger judgment, tangible work to discuss and a much clearer understanding of what it takes to engineer a real system, bring your curiosity and be ready to use it.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Junior Mechanical Designer
Junior Mechanical Designer

PV Labs • Burlington

On-site
CAD 55,000 - 75,000
4-day work week
Employee equity
Mechanical Designer (Early Career)
Mechanical Designer (Early Career)

PV Labs • Burlington

On-site
CAD 55,000 - 75,000
4-day work week
Electro-Mechanical Assembly Technician
Electro-Mechanical Assembly Technician

PV Labs • Burlington

On-site
CAD 55,000 - 75,000
4-day work week
Staff Mechanical Engineer
Staff Mechanical Engineer

PV Labs • Burlington

On-site
CAD 110,000 - 150,000
Systems Test & Integration Engineer
Systems Test & Integration Engineer

PVLabs • Burlington

On-site
CAD 90,000 - 120,000
4-day work week
Staff Mechanical Engineer
Staff Mechanical Engineer

PVLabs • Burlington

On-site
CAD 110,000 - 150,000
Four‑day work week
Engineering Council access
Systems Test & Integration Engineer
Systems Test & Integration Engineer

PV Labs • Burlington

On-site
CAD 90,000 - 120,000
4-day work week (32 hours)
Electromechanical / Mechatronics Assembly Technician
Electromechanical / Mechatronics Assembly Technician

PV Labs • Burlington

On-site
CAD 60,000 - 90,000
4-day work week
Senior Mechatronic Designer — Gyro-Stabilized Optics
Senior Mechatronic Designer — Gyro-Stabilized Optics

Donnell Consulting • Burlington

On-site
Confidential
4-Day Work Week
Collaborative workplace culture
Opportunities for professional growth
Senior Mechanical Designer
Senior Mechanical Designer

Donnell Consulting • Burlington

On-site
Confidential
4-Day Work Week
Collaborative workplace culture
Opportunities for professional growth