Electronic Engineer 电子研发工程师 (SSCB方向)

ABB Inc

Vancouver

Vor Ort

CAD 90.000 - 120.000

Vollzeit

Vor 12 Tagen

Eine vollständige Bewerbung in einer Minute

Maßgeschneiderter Lebenslauf und Anschreiben – versandbereit.

Schaffe es an den ATS-Filtern vorbei

Zusammenfassung

ABB Smart Power seeks an experienced hardware engineer to lead sensing and protection circuit design for power products. You will evaluate projects, design high-voltage sensing, fast protection, and robust PCB layouts while ensuring EMC robustness and regulatory compliance.

You will collaborate with software engineers and global teams, own design documentation, and drive reliability and DFMEA, with 5+ years in hardware development and strong English communication.

Qualifikationen

  • Bachelor's degree or above in Electronics, Electrical Engineering, Automation, Measurement & Control, or a related field.
  • Proficient with EDA tools (e.g., Altium, Cadence) and circuit simulation tools (e.g., LTspice, PSpice).
  • Expert in analog circuit design.
  • Familiar with op-amps, comparators and sensing errors. Knowledge of Rogowski coils and CT sensors.
  • Understands circuit breaker protection principles and trip characteristics.
  • Experience defining or implementing protection logic is a plus; knowledge of power supplies and embedded systems.
  • Familiar with EMC theory, testing, insulation coordination (IEC 60664) and industrial protocols (Modbus, CAN).
  • Experience with low-voltage standards (IEC 60947, UL 489) and protection relays.
  • Development experience with electronic trip units, protection relays, energy metering or DC distribution.
  • Basic knowledge of power semiconductor driving and reliability design (DFMEA).
  • Good spoken and written English; strong cross-functional coordination.
  • 5+ years of hardware development experience.

Aufgaben

  • Take part in project evaluations and propose hardware solutions for sensing and protection.
  • Design voltage sensing circuits and high-voltage dividers with isolation.
  • Create fast protection circuits and fast trip triggering logic.
  • Define protection logic with software engineers including overload, short-time, instantaneous, and ground-fault protection.
  • Analyze sensing accuracy, error budgets, temperature drift, calibration and metering support.
  • Own EMC and noise-immunity design for sensing and protection circuits.
  • Lead PCB layout reviews focusing on signal integrity and isolation.
  • Create design documentation including schematics, BOM, DFMEA and test reports.
  • Support testing and certification to IEC/UL standards and corrective actions.
  • Maintain products in series production and support lifecycle management.
  • Assist with cost and quality optimization and supplier communication.
  • Interpret customer requirements and translate to technical specs.
  • Coordinate with cross-functional/global teams to plan R&D projects and complete assigned tasks.

Kenntnisse

Schematic design
PCB layout
Altium
Cadence
Analog circuit design
LTspice
PSpice
Op-amps & comparators
Sensing with Rogowski/CT
Protection concepts & trip
EMC theory & testing
Insulation coordination IEC 60664
Industrial protocols (Modbus/CAN)
Power electronics knowledge
DFMEA / reliability design
English communication

Ausbildung

Bachelor's degree in Electronics / Electrical Engineering

Tools

Altium
Cadence
LTspice
PSpice

Jobbeschreibung

Bij ABB helpen we industrieën efficiënter en schoner te werken en iedere medewerker draagt daaraan bij. U krijgt de ruimte om leiding te nemen, wordt ondersteund in uw ontwikkeling en zult trots zijn op de impact die we samen realiseren. Sluit u bij ons aan en help de wereld draaiende te houden.

Deze functie rapporteert aan:

Chapter Lead

__

Your role and responsibilities

In this role you will have the opportunity to [insert]. Each day, you will [insert]. You will also showcase your expertise by [insert]. This role is contributing to the EL Smart Power business in Xiamen China. You will be mainly accountable for:

  • Take part in SSCB project evaluations and technical feasibility studies. Propose hardware solutions for sensing and protection.Design current sensing circuits using Rogowski coils and current transformers. Competence of signal conditioning, isolated amplification, anti-aliasing filtering and ADC selection.
  • Design voltage sensing circuits, including high-voltage dividers and isolated sensing. Implement over-voltage, under-voltage and phase-loss detection.
  • Design fast hardware protection circuits, such as comparator-based microsecond-level short-circuit detection and di/dt detection. These circuits must detect short-circuit faults quickly and trigger trip.
  • Define protection logic together with software engineers. This covers trip characteristics such as long-time overload, short-time delay, instantaneous, ground fault and over-temperature protection. Agree how hardware and software protection divide and coordinate their tasks, and contribute to selectivity design.
  • Analyze and verify sensing accuracy, including error budget, temperature drift, linearity and calibration methods. Support energy metering and fault recording functions.
  • Own EMC and noise-immunity design for the sensing and protection circuits. The circuits must neither trip falsely nor fail to trip under strong electromagnetic interference.
  • Lead PCB layout reviews, with a focus on sensing signal integrity, separation of analog and digital ground, and high-voltage isolation distances.
  • Create and maintain complete design documentation as required, including schematics, BOM, design calculations, DFMEA and test reports.
  • Support type testing and certification to standards such as IEC 60947-2, UL 489 and IEC 61000-4-x, and drive any corrective actions.
  • Maintain products in series production, resolve design-related quality issues and support product lifecycle management.
  • Support cost and quality optimization, including component selection, validation of alternative components and technical communication with suppliers.
  • Interpret customer requirements, translate them into technical specifications and evaluate design concepts.
  • Coordinate with cross-functional and global teams to plan and manage R&D projects.Complete other tasks assigned by the company.
Qualifications for the role
  • Bachelor's degree or above in Electronics, Electrical Engineering, Automation, Measurement & Control, or a related field.Strong skills in schematic design and PCB layout, with solid circuit calculation ability.
  • Proficient with EDA tools (e.g., Altium, Cadence) and circuit simulation tools (e.g., LTspice, PSpice).Expert in analog circuit design.
  • Familiar with op-amps, comparators, and able to analyze sensing errors.Familiar with how current and voltage sensors work (Rogowski coil, CT), and with their selection and application.
  • Understands circuit breaker protection principles and trip characteristics (overload, short circuit, ground fault, etc.).
  • Experience defining or implementing protection logic is a plus.Knowledge of power supplies, magnetic components and embedded systems.
  • Able to work effectively with software engineers.Familiar with EMC theory, testing and corrective actions. Knowledge of insulation coordination (IEC 60664).Familiar with industrial communication protocols and IoT applications, such as Modbus and CAN.
  • Familiarity with low-voltage product standards (IEC 60947 series, UL 489)
  • Development experience with electronic trip units, protection relays, energy metering, solid-state circuit breakers or DC distribution products
  • Basic knowledge of power semiconductor driving and protectionKnowledge of DFMEA, reliability design or functional safety
  • Good spoken and written English, able to work with global teams.
  • Excellent cross-functional communication and coordination skills.Able to work independently and perform well under pressure.
  • 5+ years of hardware development experience.
More about us

ABB Smart Power provides energy distribution solutions for data centers, industrial and manufacturing plants, critical infrastructure and commercial buildings. The Division’s technical teams work closely with industry partners, delivering advanced solutions that support rapid growth, energy

transition, and sustainability objectives. The Division’s portfolio includes industrial circuit breakers, low-voltage systems, motor starting applications, and safety devices like switches and relays. Its Power Protection unit supports the world’s largest data center companies with advanced energy-efficient UPS solutions. The Division’s ABB Ability Energy Manager provides a scalable, easy-to-use platform that helps organizations save energy and reduce CO2 emissions.

Voor het bouwen aan een schonere en slimmere toekomst zijn uiteenlopende denkers nodig: nieuwsgierige, moedige en creatieve mensen. Daarom verwelkomen we mensen met alle achtergronden en ervaringen.

Klaar om indruk te maken?

Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

R&D Engineer - Hardware
R&D Engineer - Hardware

ABB Inc • Vancouver

Vor Ort
CAD 110.000 - 150.000
R&D Engineer - Electromechanical
R&D Engineer - Electromechanical

ABB Inc • Vancouver

Vor Ort
CAD 90.000 - 130.000
(80 -100%) R&D Electronics Hardware Engineer
(80 -100%) R&D Electronics Hardware Engineer

ABB Inc • Vancouver

Vor Ort
CAD 180.000 - 249.000
Digital Engineer - Process Performance Optimization
Digital Engineer - Process Performance Optimization

ABB Inc • Vancouver

Hybrid
CAD 141.000 - 198.000
Health benefits
401(k) retirement plan
11 paid holidays
+1
IS Project Manager for Sales Configurators
IS Project Manager for Sales Configurators

ABB Inc • Vancouver

Remote
CAD 120.000 - 160.000
Flexible working hours
Work from home with home office stipen
Annual financial bonus and salary reiv
+5
IT Manufacturing Execution Systems Specialist
IT Manufacturing Execution Systems Specialist

ABB Inc • Vancouver

Hybrid
CAD 67.000 - 82.000
Flexible hours
Hybrid work options
Wellbeing support
+2
Project manager for Engineering /Sustainability portfolio
Project manager for Engineering /Sustainability portfolio

ABB Inc • Vancouver

Vor Ort
CAD 120.000 - 160.000
Data Engineer, Snowflake & Data Platforms
Data Engineer, Snowflake & Data Platforms

ABB Inc • Vancouver

Hybrid
CAD 110.000 - 189.000
Reliability & Lifecycle Performance Lead
Reliability & Lifecycle Performance Lead

ABB Inc • Vancouver

Hybrid
CAD 166.000 - 211.000
Senior Project Electrical Engineer
Senior Project Electrical Engineer

ABB Inc • Calgary

Hybrid
CAD 110.000 - 160.000