CNC Machinist (Rotating Shift) Engineering - John Crane - Hamilton

Smiths Group; Hamilton; Hybrid; CAD 30,000 - 41,000; Full time

Benefits offered by this job

Shift premium $1.25/hour

Pension contributions 8.25%

Competitive starting wage

Job summary

John Crane, a business of Smiths Group, is seeking a CNC Machinist at our Stoney Creek location to set up and operate CNC Mills and Turning Centers, read drawings, and ensure finished parts meet tolerances. The role involves multi-tasking, tool pre-sets, and program edits as needed.

You'll work on a rotating two-week shift with competitive wages, shift premiums, and a structured path for training and continuous improvement.

Qualifications

• High school education plus 2 years technical training.
• Strong knowledge and hands-on experience with CNC milling or turning operations.
• Requires over 5 years of experience in related or subordinate work, plus 6 months on the job training.
• Proficient in reading blueprints and understanding tolerances and dimensions.
• Familiarity with G-code programming and CNC machine controls.
• Strong attention to detail and commitment to quality.
• Experience with Mazak (Mill‑Turn), Okuma, and Haas machines an asset.
• CNC programming experience (at the machine or offline) an asset.
• Experience in precision component manufacturing.
• Red Seal or equal experience
• Proficient on operating manual lathes and mills.

Responsibilities

• Set up, operate, and run CNC Mills and/or CNC Turning Centers.
• Interpret engineering drawings, blueprints, and work instructions.
• Understand and apply GD&T, tolerances, product features, and dimensional requirements.
• Perform machine setups including tooling, offsets, and fixture alignment.
• Notifies supervisor of shop and tooling requirements.
• Operates CNC machines as assigned and may be required to operate more than one machine simultaneously.
• Follows preventative maintenance procedures as outlined by machine manufacturers or supervisors.
• Required to assist in machine repair when needed.
• Keeps machine and work area safe, clean, lubricated and orderly.
• Keeps accurate time reporting on all activities.
• Remains aware and follows all health and safety practices. Works in a safe fashion and reports any concerns to supervisor.
• Trains and assists other CNC set up Operators.
• Utilizes knowledge of working properties for a wide variety of materials such as aluminum, brass, cast iron, alloy steels, plastics, etc.
• Pre-sets tools and addresses tool off-sets prior to finishing cuts.
• Uses measuring instruments such as micrometers, vernier, caliper, CMM, etc. to verify conformance to specifications.
• Works to required tolerances and is responsible for quality of work produced.
• May be required to assist in machine repair.
• Required to make edits to programs.
• Report all opportunities for continuous improvement.
• Utilizes knowledge of shop mathematics, charts and tables.
• Performs other duties as assigned utilizing normal skill and ability of the current position.
• Take part in training for new skills.

Skills

CNC milling

CNC turning

Blueprints reading

GD&T

Mazak

Okuma

Haas

Quality assurance

Education

High school + 2 years technical training

Tools

Mazak

Okuma

Haas

Job description

John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies.

We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards.

John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries.

Job Description

SUMMARY OF ESSENTIAL FUNCTIONS:

The CNC Machinist will perform and record manufacturing activities consistent with those required to meet company objectives. Must be able to handle multiple concurrent tasks with fluctuating priorities. Sets up and operates CNC Milling or Turning machines to manufacture precision components. Capable of operating manual lathes and mills. Familiar with operations like drilling, tapping, threading, turning, reaming, boring, facing and other machining operations performed on C.N.C. equipment. Able to modify or edit existing programs.

SPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIES INCLUDE BUT ARE NOT LIMITED TO:

• Set up, operate, and run CNC Mills and/or CNC Turning Centers.
• Interpret engineering drawings, blueprints, and work instructions.
• Understand and apply GD&T, tolerances, product features, and dimensional requirements.
• Perform machine setups including tooling, offsets, and fixture alignment.
• Notifies supervisor of shop and tooling requirements.
• Operates C.N.C machines as assigned and may be required to operate more than one machine simultaneously.
• Follows preventative maintenance procedures as outlined by machine manufacturers or supervisors.
• Required to assist in machine repair when needed.
• Keeps machine and work area safe, clean, lubricated and orderly.
• Keeps accurate time reporting on all activities.
• Remains aware and follows all health and safety practices. Works in a safe fashion and reports any concerns to supervisor.
• Trains and assists other CNCset up Operators.
• Utilizes knowledge of working properties for a wide variety of materials such as aluminum, brass, cast iron, alloy steels, plastics, etc.
• Pre-sets tools and addresses tool off-sets prior to finishing cuts.
• Uses measuring instruments such as micrometers, vernier, caliper, CMM, etc. to verify conformance to specifications.
• Works to required tolerances and is responsible for quality of work produced.
• May be required to assist in machine repair.
• Required to make edits to programs.
• Report all opportunities for continuous improvement.
• Utilizes knowledge of shop mathematics, charts and tables.
• Performs other duties as assigned utilizing normal skill and ability of the current position.
• Take part in training for new skills.

Qualifications

POSITION REQUIREMENTS:

• High school education plus 2 years technical training.
• Strong knowledge and hands-on experience with CNC milling or turning operations.
• Requires over 5 years of experience in related or subordinate work, plus 6 months on the job training.
• Proficient in reading blueprints and understanding tolerances and dimensions.
• Familiarity with G-code programming and CNC machine controls.
• Strong attention to detail and commitment to quality.
• Experience with Mazak (Mill‑Turn), Okuma, and Haas machines an asset.
• CNC programming experience (at the machine or offline) an asset.
• Experience in precision component manufacturing.
• Red Seal or equal experience
• Proficient on operating manual lathes and mills.

PHYSICAL/MENTAL REQUIREMENTS:

• Must be able to sit for extended periods of time; a minimum of 2 hours.
• Must be able to maneuver to all areas of the office, shop, warehouse, or manufacturing plant.
• Must be able to lift up to 35 pounds.
• Must be able to bend, reach, kneel, twist, and grip items while working at assigned desk area.
• Must have manual dexterity and coordination to operate office equipment.
• Must be able to simultaneously manage several objectives, changing priorities and reassign priorities to complete assignments.
• Must be able to read, write, speak and understand English.
• Must be able to respond to visual and aural cues.

WORK ENVIRONMENT:

Work environment is considered only within the Stoney Creek location on a 2-shift operation in a manufacturing plant.

• The noise level in the work environment is usually loud, and approved PPE is required when on the factory floor.

COMPENSATION & BENEFITS:

• Competitive starting wage within increases after 3, 6, 9 and 12 months.
• Shift premiums of an additional $1.25 hour in the afternoon shift
• 8.25% Employer Pension contributions with an additional optional 1% match

ROTATING SHIFT: Every 2 weeks (Monday-Friday: 7:00 am - 3:00 pm / 3:00 pm - 11:00 pm)

Additional Information

With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity.

Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network.

Join us for a great career with competitive compensation and benefits, while helping engineer a better future.

We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity.