Apprentice Welder - Night Shift

Powell; Edmonton; On-site; CAD 28,000 - 33,000; Full time

Job summary

Powell Canada Inc. in Edmonton’s Fabrication department seeks an Apprentice Welder to produce precise parts using various welding processes. The role reports to the Manufacturing Supervisor and emphasizes safety, drawing comprehension, and quality workmanship.

The position requires completion of a welding program (3rd year), a high school diploma, and active apprenticeship status. Pre-employment tests and strict safety standards apply; permanent employment is available.

Qualifications

• High School diploma required.
• Completion of 3rd year in a Welding program.
• Registered Apprenticeship with AIT (or provincial equivalent).
• CSTS 2020 required before start date.
• Pre-employment substance abuse and medical testing will be conducted on hire.
• CWB Certification is considered an asset (FCAW, all position).
• Familiarity with MES (Manufacturing Execution System).
• Safety certifications are an asset for the position.

Responsibilities

• Fit-up Weldment per required drawings and product specs.
• Weld structural steel or sheet metal using hand tools and clamps.
• Meet dimensional specs from drawings and templates.
• Determine weld locations from drawings and tolerances.
• Operate metalworking machines (punch, drill, shape).
• Maintain work area cleanliness and Powell Quality System compliance.
• Perform light maintenance on welding equipment and tools.
• Operate plasma cutters and cut materials as required.
• Participate in Powell Safety Training and meetings.
• Ensure quality by following standard work and addressing risks.

Skills

Read drawings

Read welding symbols

Tape measure literacy

Teamwork

Attention to detail

English language

Education

High School diploma

Welding program – 3rd year

Registered Apprenticeship (AIT)

CSTS 2020

Tools

MES (Manufacturing Execution System)

CWB FCAW asset

Job description

Powell People Solving Tough Problems

Based out of the Electrical Division Edmonton (EDE) location, the Apprentice Welder will report to the Manufacturing Supervisor of the Fabrication department. The Apprentice Welder will use a variety of welding processes and tools to produce precision parts and to construct Powell Canada products.

• Fit-up Weldment per required mechanical engineered drawing and Product Specifications.
• Work with small hand tools, clamps and grinders to fit-up and weld structural steel or sheet metal products.
• Produce a variety of products, to meet the dimensional specifications of the mechanical engineered drawing.
• From the drawing, determine where each weld is to be performed and to meet the size and length requirements of each weld specified within the given tolerance allowed.
• Measuring and marking sheet metal according to drawings or templates.
• Meet any cosmetic or appearance specifications. This may require grinding welds and sheet metal buffing.
• Operate metalworking machines to cut punch, drill, and shape or straighten sheet metal.
• Grind and buff seams, joints and rough surfaces.
• Performing light maintenance on your welding and cutting equipment’s as well as small power tools, and fume extractors.
• Maintain the cleanliness of your work area and meet all requirements of the Powell Quality System for this position.
• Perform light maintenance on welding equipment such as replacing contact tips and nozzles, replacing liners and entire weld gun assemblies, replacing drive rolls on wire feeders and safely exchanging shielding gas bottles.
• Operate plasma cutters and cut materials using power tools or by hand.
• Participate in Powell's ongoing Safety Training.
• Promote a safety culture as well as attend all safety meetings.
• Ensures quality by following standard work instructions and identifying any potential risks to product quality.
• Ensure work areas remain clean and well organized.
• Other duties as required.

Job Description

Powell People Solving Tough Problems

Based out of the Electrical Division Edmonton (EDE) location, the Apprentice Welder will report to the Manufacturing Supervisor of the Fabrication department. The Apprentice Welder will use a variety of welding processes and tools to produce precision parts and to construct Powell Canada products.

Essential Responsibilities

• Fit-up Weldment per required mechanical engineered drawing and Product Specifications.
• Work with small hand tools, clamps and grinders to fit-up and weld structural steel or sheet metal products.
• Produce a variety of products, to meet the dimensional specifications of the mechanical engineered drawing.
• From the drawing, determine where each weld is to be performed and to meet the size and length requirements of each weld specified within the given tolerance allowed.
• Measuring and marking sheet metal according to drawings or templates.
• Meet any cosmetic or appearance specifications. This may require grinding welds and sheet metal buffing.
• Operate metalworking machines to cut punch, drill, and shape or straighten sheet metal.
• Grind and buff seams, joints and rough surfaces.
• Performing light maintenance on your welding and cutting equipment’s as well as small power tools, and fume extractors.
• Maintain the cleanliness of your work area and meet all requirements of the Powell Quality System for this position.
• Perform light maintenance on welding equipment such as replacing contact tips and nozzles, replacing liners and entire weld gun assemblies, replacing drive rolls on wire feeders and safely exchanging shielding gas bottles.
• Operate plasma cutters and cut materials using power tools or by hand.
• Participate in Powell's ongoing Safety Training.
• Promote a safety culture as well as attend all safety meetings.
• Ensures quality by following standard work instructions and identifying any potential risks to product quality.
• Ensure work areas remain clean and well organized.
• Other duties as required.

Core Competencies

• Comprehension and understanding of show drawings.
• Ability to read or learn to understand various welding symbols.
• Ability to read a tape measure (including conversions from fraction to decimal and conversely from decimal to fraction and metric to imperial).
• Conscientious, thorough, accurate, and reliable when performing and completing job tasks.
• Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements.
• Able to work effectively within your team and around other departments and their activities.
• Must have basic command of the English language both written and verbal.

Qualifications

• Minimum education level of a High School diploma is required.
• Completion of 3rd year in a Welding program.
• Registered Apprentice with AIT (or other provincial programs).
• CWB Certification is considered an asset, preferably FCAW S-classification all position.
• Structural steel fabrication experience is considered an asset.
• Familiarity with MES (Manufacturing and Execution System).
• Safety certifications are an asset for the position.
• CSTS 2020 will be required before start date.
• Due to the safety sensitive nature of this position successful candidates will undergo pre-employment substance abuse and medical testing upon hire.

Work Authorization

This is a permanent position. Applicants must be legally authorized to work in Canada at the time of hire. Immigration sponsorship is not typically available and will be considered only where supported by business needs and applicable legal requirements.

Working Conditions

• Safety sensitive position in a temperature controlled manufacturing or industrial environment with occasional outside activities.
• Required to wear personnel protective equipment at all times (i.e., hard hats, safety glasses, hearing protection, safety harnesses and respirators) when required.
• Must be able to work from all types of ladders (step ladders, "A" frame ladders, and all-size extension ladders).
• Working around loud machinery.

Physical Requirements

• Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs.
• Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously.
• Continuous standing, walking 50-300 foot distances for long periods of time with only occasional sitting.
• Ability to lift up to 50 lbs. frequently throughout the shift
• Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently.
• Using upper extremities to apply or exert a force continuously up to 20 lbs. throughout the shift and occasionally 100lbs.
• Typing, punching or applying pressure to an object with fingers and palm.
• Perceiving size, shape, temperature or texture by touching with the fingertips.

Who We Are

Powell Canada Inc. is a subsidiary of Powell Industries, which is located in Houston, Texas. Globally, we have over 70 years of experience. Powell Canada is a reputable electrical manufacturing and electrical/instrumentation contracting company. We hold a strong industry presence with offices located in Acheson, Calgary and Montreal.

Powell strives to create one unified company through training, communication and leadership. We offer diversified services based on our customer’s needs, keeping us on the cutting edge of new products and services within our industry.

Your Partner in Safety

Successful candidates must have legal authorization to work in Canada on a full-time basis for any employer, only those candidates selected for an interview will be contacted. Powell Canada, Inc. is an equal opportunity employer.