Analog Validation & Characterization Engineer

HaiLa

Ottawa

On-site

CAD 90,000 - 130,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

HaiLa is seeking an experienced Analog Validation & Characterization Engineer to lead electrical validation, characterization, and production test for analog/RF/mixed-signal ICs, including ultra-low-power Wi-Fi radios.

You will own first silicon bring-up through high-volume production test, collaborating with design, packaging, and product teams to ensure performance across real-world conditions. Strong RF measurement and Python scripting skills are essential.

Qualifications

  • BS/MS in Electrical Engineering or equivalent with 5+ years hands-on analog/RF test experience.
  • Hands-on PCB bring-up, debugging, and test board/tower layout knowledge.
  • Experience with RF measurements and characterization (S-parameters, noise figure, gain).

Responsibilities

  • Plan and execute lab bench validation of new silicon and production test.
  • Bring up PCBs and evaluation boards for silicon, interfaces, and power rails.
  • Tune RF circuits and matching networks to meet performance targets.
  • Develop Python-based control frameworks for benchtop instruments using SCPI.
  • Characterize chip-to-chip and lot-to-lot performance; report findings.
  • Define and run PVT characterization plans to establish guardbands and margins.
  • Operate lab equipment (analyzers, oscilloscopes, power supplies) and wafer probe stations.
  • Collaborate with PCB design to ensure test boards meet signal integrity needs.
  • Document procedures and results for internal reviews and datasheets.

Skills

Lab bench validation
Python scripting
RF measurements
PCB debugging
SCPI instrument control
Data analysis
Communications skills

Education

BS/MS in Electrical Engineering

Tools

Teradyne IG-XL
Advantest
Cohu probes

Job description

HaiLa is building ultra-low power radio communications solutions that will eliminate the need for batteries in wireless communication devices by offering a product that is hyper power efficient that can run indefinitely from harvested energy. Our missionis to enable Ambient Power IoT with sensing everywhere on existing protocols such as Wi‑Fi.

This is an exciting opportunity for an Analog Validation & Characterization Engineer to join our dynamic and diverse team! This is a full-time, on‑site role reporting to the VP of Engineering.

Based in Montreal, HaiLa is supported by leading sustainability‑focused venture investors as well as Stanford University.

Description

HaiLa’s Engineers develop the next‑generation wireless technologies dedicated to unlocking the vast potential of the Internet of Things. HaiLa’s chipsets focus on ultra‑low power Wi‑Fi backscatter connectivity.

We are looking for an experienced Analog Validation & Characterization Engineer to lead the electrical validation, characterization, and production test development for our analog, RF, and mixed‑signal integrated circuits, including ultra‑low‑power Wi‑Fi radios. You will own the path from first silicon bring‑up through high‑volume production test, working closely with design, packaging, and product engineering teams to ensure our chips meet performance specifications across the full range of real‑world operating conditions. Hands‑on experience working with RF circuits and RF measurements is essential for this role.

This is a hands‑on role for someone who is equally comfortable bringing up, debugging, and tuning boards on the lab bench as they are writing Python scripts to automate precision instrumentation.

This is a test and characterization role, not an IC design role. It suits someone building a career in silicon validation and production test, rather than someone looking to move into analog or digital IC design. Board‑level design experience (test boards, load boards, evaluation boards) is welcome.

Responsibilities:
  • Plan and execute lab bench validation of new silicon, including bring‑up, debug, and functional/performance verification against block‑level and full‑chip specifications
  • Bring up, debug, and tune PCBs and evaluation boards for new silicon, including GPIO, JTAG, and I2C interfaces, LDOs and power rails, oscillators, and power amplifiers, as well as debugging faulty grounds and diagnosing improper impedances
  • Tune RF circuits on the bench, such as matching networks, to meet performance targets
  • Develop and maintain Python‑based control frameworks that automate benchtop instruments over SCPI for repeatable, efficient characterization
  • Perform chip‑to‑chip and lot‑to‑lot performance characterization, comparing measured results against expected design targets and datasheet specifications, and produce clear, data‑driven reports for design and product teams
  • Design and run systematic characterization studies across Process, Voltage, and Temperature (PVT) corners to establish guardbands, yield risk, and margin to specification
  • Operate and maintain lab bench equipment (network analyzers, spectrum analyzers, protocol analyzers, signal/pattern generators, oscilloscopes, power supplies, precision DMMs, temperature‑controlled chambers, etc.) and probe‑based test setups (manual and semi‑automated wafer probe stations, RF/DC probing)
  • Collaborate with PCB design/layout to define and review test board and load board designs, ensuring signal integrity, calibration accuracy, and de‑embedding suitable for high‑precision analog/RF measurements
  • Partner with design engineers to correlate bench, probe, and production test data against simulation and translate findings into design or test program improvements
  • Document test procedures, characterization results, and specification compliance for internal design reviews and customer‑facing datasheets
  • BS/MS in Electrical Engineering or a related field (or a technologist diploma with equivalent industry experience), with 5+ years of hands‑on experience in analog/RF/mixed‑signal IC test, validation, or characterization
  • Hands‑on experience bringing up and debugging PCBs, including GPIO, JTAG, and I2C interfaces, LDOs, oscillators, and power amplifiers
  • Experience tuning RF circuits, such as matching networks
  • Strong Python scripting skills, including building control frameworks for benchtop test equipment using the SCPI protocol
  • Demonstrated experience with lab bench test equipment and instrumentation for analog/RF measurements
  • Proven track record characterizing chip‑to‑chip performance and reporting results against block‑level specs and full‑chip performance targets
  • Demonstrated experience designing and executing systematic PVT characterization plans
  • Solid understanding of PCB test board / load board design and layout practices for high‑frequency and precision analog signals (grounding, decoupling, controlled impedance, shielding)
  • Working knowledge of CMOS analog/mixed‑signal design principles sufficient to interpret schematics, specs, and simulation data
  • General understanding of CMOS packaging and bonding processes (wire bond, flip‑chip, WLCSP, etc.) and their impact on electrical performance
  • Strong data analysis skills (statistical analysis, correlation, outlier detection) and proficiency with tools such as Python, MATLAB
  • Excellent written and verbal communication skills, with the ability to present characterization findings clearly to cross‑functional teams
  • On‑site presence is required in our Montreal office. This is not a remote or hybrid role.
Preferred qualifications:
  • Experience with RF characterization (S‑parameters, noise figure, gain/linearity, matching networks) in addition to analog/mixed‑signal test
  • Experience developing automated test programs on production ATE platforms (e.g., Teradyne IG‑XL, Advantest, Cohu) for foundry wafer probe and/or OSAT final test
  • Hands‑on experience with wafer probe test equipment and probing techniques (manual or automated)
  • Experience supporting new product introduction (NPI) from first silicon through production ramp
  • Familiarity with reliability test methods (HTOL, burn‑in, ESD/latch‑up characterization)
  • Experience working directly with foundries and OSATs on test insertion planning and yield improvement
Why work for HaiLa
  • Play a key role in bringing the breakthrough power‑efficient technology to market.
  • Be part of a solution that aims to remove hundreds of millions of batteries from landfills.
  • Work with a lean and agile team of the best hardware and software engineers in the industry who are eager to share their expertise.
  • Gain work experience with an innovative high‑tech start‑up with a future‑proof vision.
  • Take new analog/RF silicon from first bring‑up through high‑volume production test
  • Work hands‑on across the lab bench, wafer probe, and production ATE in a single role
  • Generate the characterization data that drives design decisions and customer‑facing datasheets
  • Work in a driven, fast‑paced startup environment and help build the validation foundation from the ground up...
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Analog Validation & Characterization Engineer
Analog Validation & Characterization Engineer

HaiLa • Montreal

On-site
CAD 90,000 - 120,000
Analog RF Validation Lead - Lab & Production Test
Analog RF Validation Lead - Lab & Production Test

Haila • Ottawa

On-site
CAD 90,000 - 130,000
Ingénieur·e de Conception Physique (Analog IC Layout Engineer)
Ingénieur·e de Conception Physique (Analog IC Layout Engineer)

Haila • Montreal

Hybrid
CAD 70,000 - 90,000
Opportunités de développement professionnel
Travail au sein d’une équipe agile
Impact écologique positif
Silicon Validation Software Engineer (Sr Staff)
Silicon Validation Software Engineer (Sr Staff)

Synopsys, Inc. • Mississauga

On-site
CAD 120,000 - 180,000
Principal Power Electronics Architect
Principal Power Electronics Architect

SmartD Technologies, Inc. • Montreal

Hybrid
CAD 130,000 - 190,000
Hybrid work environment
On-site 425 rue Guy
Four weeks paid vacation
+1
Signal Processing & SIGINT Developer
Signal Processing & SIGINT Developer

Octasic • Montreal

On-site
CAD 110,000 - 160,000
Performance bonus
Employee share purchase program
Comprehensive insurance
+6
Senior RF Engineer – Electromagnetic Design & Simulation
Senior RF Engineer – Electromagnetic Design & Simulation

Photonic Inc. • British Columbia

Hybrid
CAD 117,000 - 161,000
Radio Frequency Hardware Designer
Radio Frequency Hardware Designer

Octasic • Montreal

On-site
CAD 85,000 - 120,000
Performance bonus
Employee share purchase program
Comprehensive insurance (medical, dent
+7
Senior Staff Hardware Validation Engineer
Senior Staff Hardware Validation Engineer

Synopsys Inc • Mississauga

On-site
CAD 110,000 - 140,000
Principal Analog Design Engineer-19318
Principal Analog Design Engineer-19318

Synopsys Inc • Markham

On-site
CAD 140,000 - 210,000
Health benefits
Wellness program
Retirement plan