GNC Engineer - Embedded Controls (Starlink)

SpaceX

Redmond

On-site

AUD 186,000 - 245,000

Full time

37 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Stock options
401(k) retirement plan
Medical, vision, and dental coverage
Paid time off

Job summary

SpaceX is seeking an experienced GNC Engineer - Embedded Controls for Starlink in Redmond, WA. You will apply dynamics and closed-loop control expertise to pointing, attitude control, and propulsion systems, performing design trades, simulations, and flight code deployment.

Responsibilities include implementing control systems, validating hardware, and supporting production software. The role demands readiness for extended hours and a fast-paced startup environment.

Qualifications

  • Bachelor's degree in aerospace, physics or engineering as required.
  • Experience with C++ software development and embedded systems.
  • Familiarity with closed-loop control design and analysis.

Responsibilities

  • Design and implement electromechanical control systems for spacecraft subsystems.
  • Develop satellite attitude control and momentum management solutions.
  • Create high-fidelity simulations and integrate them with tooling.
  • Implement, validate and deploy production C++ software for control systems.
  • Provide engineering data review and performance monitoring.

Skills

C++ programming
Closed-loop control
State estimation

Education

Bachelor's degree in aerospace, physics or engineering
Master's or PhD in physics or engineering

Tools

MATLAB
Python

Job description

GNC Engineer - Embedded Controls (Starlink)

Redmond, WA

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the globe.

As a control systems engineer on the Starlink Guidance, Navigation, and Control team (GNC), you will apply a strong expertise in dynamics and closed loop controls to achieve robust and precise pointing on satellites, payloads, propulsion systems, and mechanisms. This is not just an analysis role – you will be responsible for vehicle design trades, simulation, flight code implementation, and ultimately deploying and operating your features in space.

Come help us fly the world's largest constellation and make high speed internet available everywhere, all the time.

RESPONSIBILITIES:

  • Design, analysis, implementation of electromechanical control systems such as solar array actuators, antenna gimbals, and high bandwidth active optics.
  • Design, analysis, implementation of satellite attitude control and momentum management systems.
  • Design, analysis, implementation of fluid and power system controls for the Starlink hall thrusters.
  • Optimal state estimation as applied to mechanical alignment and attitude determination.
  • Hardware performance specification and sizing, support for hardware iteration and firmware bringup, design qualification, automated production screening, and performance monitoring in the fleet.
  • Development and maintenance of high fidelity simulations using C++, python, matlab, integration of those simulations into collaborative analysis tools.
  • Implementation, validation, unit testing, and deployment of production software (C++) pertinent to the systems described above.
  • Provide engineering and data review support for hardware development, network level performance monitoring.

BASIC QUALIFICATIONS:

  • Bachelor's degree in aerospace, physics or an engineering discipline.
  • Software development experience in C++.
  • Experience with design and analysis of closed loop control systems.

PREFERRED SKILLS AND EXPERIENCE:

  • Master's degree or PhD in physics or an engineering discipline.
  • Very strong expertise and demonstrated project or professional experience in linear closed loop controls analysis and design, including state space and frequency domain methods.
  • Experience with flexible body dynamics and reduced finite element models thereof in the context of closed loop control systems analysis.
  • Strong expertise in embedded C++, ideally in the context of electromechanical control systems firmware.
  • Strong understanding of classical rigid body dynamics, orbital mechanics, modeling and simulation thereof.
  • Direct experience with spacecraft operations and flight software development, testing, and deployment.
  • Capable of identifying and solving complex problems in a self-directed manner.
  • Passion for advancing the commercial space industry.
  • Ability to work in a fast paced, autonomously driven, and demanding start-up atmosphere.
  • Excellent communication skills both written and verbal.

ADDITIONAL REQUIREMENTS:

  • Must be willing to work extended hours and weekends as needed.

GNC ENGINEER - EMBEDDED CONTROLS (STARLINK)

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the globe.

As a control systems engineer on the Starlink Guidance, Navigation, and Control team (GNC), you will apply a strong expertise in dynamics and closed loop controls to achieve robust and precise pointing on satellites, payloads, propulsion systems, and mechanisms. This is not just an analysis role – you will be responsible for vehicle design trades, simulation, flight code implementation, and ultimately deploying and operating your features in space.

Come help us fly the world's largest constellation and make high speed internet available everywhere, all the time.

RESPONSIBILITIES:

  • Design, analysis, implementation of electromechanical control systems such as solar array actuators, antenna gimbals, and high bandwidth active optics.
  • Design, analysis, implementation of satellite attitude control and momentum management systems.
  • Design, analysis, implementation of fluid and power system controls for the Starlink hall thrusters.
  • Optimal state estimation as applied to mechanical alignment and attitude determination.
  • Hardware performance specification and sizing, support for hardware iteration and firmware bringup, design qualification, automated production screening, and performance monitoring in the fleet.
  • Development and maintenance of high fidelity simulations using C++, python, matlab, integration of those simulations into collaborative analysis tools.
  • Implementation, validation, unit testing, and deployment of production software (C++) pertinent to the systems described above.
  • Provide engineering and data review support for hardware development, network level performance monitoring.

BASIC QUALIFICATIONS:

  • Bachelor's degree in aerospace, physics or an engineering discipline.
  • Software development experience in C++.
  • Experience with design and analysis of closed loop control systems.

PREFERRED SKILLS AND EXPERIENCE:

  • Master's degree or PhD in physics or an engineering discipline.
  • Very strong expertise and demonstrated project or professional experience in linear closed loop controls analysis and design, including state space and frequency domain methods.
  • Experience with flexible body dynamics and reduced finite element models thereof in the context of closed loop control systems analysis.
  • Expertise in state estimation, kalman filters, information filters, etc.
  • Strong expertise in embedded C++, ideally in the context of electromechanical control systems firmware.
  • Strong understanding of classical rigid body dynamics, orbital mechanics, modeling and simulation thereof.
  • Direct experience with spacecraft operations and flight software development, testing, and deployment.
  • Capable of identifying and solving complex problems in a self-directed manner.
  • Passion for advancing the commercial space industry.
  • Ability to work in a fast paced, autonomously driven, and demanding start-up atmosphere.
  • Excellent communication skills both written and verbal.

ADDITIONAL REQUIREMENTS:

  • Must be willing to work extended hours and weekends as needed.
COMPENSATION AND BENEFITS:

Pay Range:

  • Level 1: $125,000.00 - $165,000.00
  • Level 2: $145,000.00 - $200,000.00

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affiantive Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

GNC Engineer, Starlink Controls (Starlink)
GNC Engineer, Starlink Controls (Starlink)

SpaceX • Redmond

On-site
AUD 186,000 - 297,000
Stock options
Discretionary bonuses
Comprehensive medical, vision, and/or牙
+4
GNC Engineer, ADCS (Starlink)
GNC Engineer, ADCS (Starlink)

SpaceX • Redmond

On-site
AUD 186,000 - 297,000
Stock options
Medical coverage
401(k) retirement plan
+3
Software Engineer, Hardware Test & Automation (Starlink)
Software Engineer, Hardware Test & Automation (Starlink)

SpaceX • Redmond

On-site
AUD 186,000 - 260,000
Stock options / long-term incentives
Medical, vision, and dental coverage
401(k) plan
+2
Software Engineer, C++ Simulations (Starlink)
Software Engineer, C++ Simulations (Starlink)

SpaceX • Redmond

On-site
AUD 186,000 - 297,000
Stock options
401(k) plan
Health, vision, dental coverage
+3
GNC Engineer, Attitude Determination and Optical Navigation (Starlink)
GNC Engineer, Attitude Determination and Optical Navigation (Starlink)

SpaceX • Redmond

On-site
AUD 186,000 - 297,000
Stock options
Medical insurance
Vision insurance
+6
Platform Engineer, Flight Software (Starlink)
Platform Engineer, Flight Software (Starlink)

SpaceX • Redmond

On-site
AUD 186,000 - 297,000
Company stock
Long-term cash awards
Medical, vision, and dental coverage
+4
Sr. Mechanical Engineer, Satellites (Starlink)
Sr. Mechanical Engineer, Satellites (Starlink)

SpaceX • Western Australia

On-site
AUD 195,000 - 318,000
Software Infrastructure Engineer (Starlink)
Software Infrastructure Engineer (Starlink)

SpaceX • Redmond

On-site
AUD 186,000 - 260,000
Stock options
401(k) plan
Medical, vision & dental
Test Specialist, Factory Automation (Starlink)
Test Specialist, Factory Automation (Starlink)

SpaceX • Redmond

On-site
AUD 70,000 - 82,000
Health insurance
401(k) retirement plan
Stock options / long-term incentives
+1
Global Operations Engineer (Starlink)
Global Operations Engineer (Starlink)

SpaceX • Redmond

On-site
AUD 148,000 - 245,000
Stock options
Bonuses
Comprehensive benefits
+1
Top locations