Welder Fabricator- Industrial and Ventilation Fans

Energia Technologies FZE; Ajman; Vor Ort; AED 45.000 - 73.000; Vollzeit

Zusammenfassung

Tanqeeb is seeking a skilled welder for our Ajman facility to assemble and weld fan components. You will read drawings, set up fittings, and perform welds with MIG/MAG, TIG, or SMAW as needed. The role requires accuracy, safety, and ability to meet daily production targets in a manufacturing environment.

Ideal candidates have 3–5 years in sheet metal/fabrication, experience with stainless steel and aluminum, and familiarity with thin-gauge materials. Basic English on the shop floor is required.

Qualifikationen

• ITI/diploma or trade certificate in welding or fabrication.
• 2G/3G to ASME IX, AWS D1.1 or ISO 9606 preferred; TWI a plus.
• 3–5 years in sheet metal and light structural fabrication.
• Experience in a fan factory preferred.
• Experience with stainless steel and aluminum; thin-gauge material 1.5–6 mm.

Aufgaben

• Weld fan casings, impellers, hubs, blades and related parts using MIG/MAG, TIG or SMAW as required.
• Read fabrication drawings and WPS; follow welding parameters.
• Fit up and tack parts; check dimensions and alignment.
• Control distortion on thin sheet metal and rotating parts for balance.
• Grind and finish welds; prepare surfaces for painting or galvanizing.
• Maintain equipment and perform self-inspections; meet daily production targets.
• Follow health and safety rules and report faults.

Kenntnisse

Welding

Drawings reading

Measuring tools

Teamwork

Ausbildung

ITI/diploma in welding

Welder qualification (ASME IX/AWS D1.1)

TWI certificate (a plus)

Tools

Plasma cutter

Press brake

Jobbeschreibung

• Weld fan casings, impellers, hubs, blades, inlet cones, bases, frames and ducting accessories. The work covers mild steel, galvanized steel, stainless steel and aluminum.

• Use MIG/MAG (GMAW) welding mainly. Also use TIG (GTAW) for stainless steel and aluminum, and stick (SMAW) where required.

• Read fabrication drawings, weld symbols and the welding procedure specification (WPS). Follow the correct parameters and welding sequence.

• Fit up and tack parts using jigs and fixtures. Check dimensions, squareness and alignment before final welding.

• Control distortion on thin sheet metal and on rotating parts. This is critical for balancing impellers and keeping them concentric.

• Grind and finish welds and prepare surfaces for painting or galvanizing.

• Carry out visual self-inspection. Fix defects such as porosity, undercut, cracks and lack of fusion, and support QC with dye penetrant or other inspections.

• Keep welding machines, torches and consumables in good condition. Report any faults.

• Follow health and safety rules: PPE, hot work permits, fume extraction, fire safety and good housekeeping (5S).

• Meet daily production targets and record completed work on job cards.

Desired Candidate Profile

Education and certification

• ITI, diploma or trade certificate in welding or fabrication.

• A valid welder qualification is preferred, such as 2G/3G (or higher) to ASME IX, AWS D1.1 or ISO 9606. A TWI or third-party certificate is a plus.

Experience

• 3-5 years in sheet metal and light structural fabrication.

• Experience in a fan factory is strongly preferred.

• Has worked with stainless steel and aluminum, and on thin-gauge material (1.5-6 mm).

Skills

• Produces clean, strong welds with little distortion.

• Reads engineering drawings and uses measuring tools: tape, vernier, square and angle gauge.

• Basic knowledge of cutting, bending and grinding tools. Operating a plasma cutter or press brake is a plus.

Attributes

• Pays close attention to quality, works safely and is disciplined.

• Works well in a team and can meet production deadlines.

• Physically fit and willing to work shifts or overtime when needed.

Other

• Basic English or Hindi for communication on the shop floor is must.