Quality Inspector Welding

Arabian Construction Co.

Abu Dhabi

On-site

AED 140,000 - 210,000

Full time

5 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Arabian Construction Co. in Abu Dhabi seeks a Quality Inspector Welding to ensure welding and piping activities comply with project specifications, codes, and QA/QC standards.

You will inspect materials, weld joints, and assemblies, verify documentation, and coordinate NDT activities with clients and subcontractors. Qualifications include CSWIP 3.1/3.2, ASNT Level II RT/UT/MT/PT, a Mechanical Engineering degree, and 5+ years in oil & gas piping/welding inspection.

Qualifications

  • Diploma or Bachelor’s Degree in Mechanical Engineering or equivalent.
  • CSWIP 3.1 / 3.2 certification (mandatory).
  • ASNT Level II in RT, UT, MT, and PT (preferred).
  • Minimum 5 years of post-CSWIP experience in piping and welding inspection within Oil & Gas or Petrochemical projects.

Responsibilities

  • Review Project Specifications, Procedures, ITPs, and Method Statements to familiarize with project-specific quality and technical requirements.
  • Perform material inspections, review MTCs for base metals and welding consumables, verify traceability, and confirm compliance with approved specifications.
  • Conduct fit-up and weld visual inspections, check dimensional tolerances, joint preparations, and verify alignment of assemblies against drawings.
  • Inspect weld size, profile, and quality, mark weld defects, and provide guidance to welders and supervisors to ensure workmanship meets project standards.
  • Verify the use of WPS, confirm welding process parameters, consumable control, and adherence to essential variables.
  • Monitor and record welding progress, welder performance, and issue NDT requests per line class and project requirements.
  • Coordinate and follow up with NDT subcontractors for radiography, UT, MT, PT; review and approve NDT reports.
  • Liaise with Clients, EPC Contractors, and Third-Party Inspectors for review and approval of welding documentation.
  • Ensure calibration and maintenance of inspection instruments such as gauges and recorders.
  • Identify and issue NCRs or CARs for defective works; coordinate and verify weld repairs and closeout of punch items.
  • Participate in line walkdowns, prepare weld maps, punch lists, and coordinate for Client/Contractor inspections and final certification.
  • Witness and verify welder qualification tests, NDT tests, mechanical tests, hydrostatic and pneumatic tests, flushing/drying operations, and reinstatement of piping systems.
  • Familiar with ASME, AWS, API, ASTM, and ISO codes relevant to piping and welding inspection.
  • Proficient in reading isometrics, P&IDs, and welding symbols; knowledgeable in pressure testing procedures and QA/QC documentation.

Skills

Welding inspection
NDT coordination
QA/QC

Education

CSWIP 3.1/3.2 certification
ASNT Level II RT/UT/MT/PT
Diploma/BSc Mechanical Engineering

Tools

Bridge cam gauges
Hi-Lo gauges
Taper gauges
Thermometers
Clamp meters
Pressure gauges
Pressure/temperature recorders

Job description

5 - 12 Years


Full Time


Job Description


The Quality Inspector Welding is responsible for ensuring all welding and piping activities comply with project specifications, international codes, and quality standards. The role involves inspection of materials, weld joints, and assemblies; coordination of NDT activities; and verification of documentation to ensure that project deliverables meet design and safety requirements.


Key Responsibilities:



  • Review Project Specifications, Procedures, Inspection Test Plans (ITPs), and Method Statements to familiarize with project-specific quality and technical requirements.

  • Perform material inspections, review Material Test Certificates (MTCs) for base metals and welding consumables, verify traceability, and confirm compliance with approved specifications.

  • Conduct fit-up and weld visual inspections, check dimensional tolerances, joint preparations, and verify alignment of assemblies against approved fabrication drawings and isometrics.

  • Inspect weld size, profile, and quality, mark weld defects, and provide guidance to welders and supervisors to ensure workmanship meets project standards.

  • Verify the use of applicable Welding Procedure Specification (WPS), confirm welding process parameters, consumable control, and adherence to essential variables.

  • Monitor and record welding progress, welder performance, and issue Non-Destructive Testing (NDT) requests in accordance with line class and project requirements.

  • Coordinate and follow up with NDT subcontractors for radiography, ultrasonic, magnetic particle, and dye penetrant testing activities; review and approve NDT reports.

  • Liaise with Clients, EPC Contractors, and Third-Party Inspectors for review, witnessing, and approval of welding documentation such as Preliminary WPS (PWPS), WPS, PQR, and NDT reports.

  • Ensure calibration and maintenance of inspection instruments such as bridge cam gauges, hi-lo gauges, taper gauges, thermometers, clamp meters, pressure gauges, and pressure/temperature recorders.

  • Identify and issue Non-Conformance Reports (NCRs) or Corrective Action Reports (CARs) for defective works; coordinate and verify weld repairs and closeout of punch items.

  • Participate in line walkdowns, prepare and update weld maps, punch lists, and coordinate for Client/Contractor inspections, testing, and final certification of works.

  • Witness and verify welder qualification tests, NDT tests, mechanical testing, hydrostatic and pneumatic testing, flushing/drying operations, and reinstatement of piping systems.

  • Comprehensive knowledge of welding processes (SMAW, GTAW, GMAW, SAW) and their field applications.

  • Strong understanding of welding metallurgy, weld defects, and acceptance criteria.

  • Skilled in interpretation of NDT reports and corrective measures for non-conforming welds.

  • Familiar with ASME, AWS, API, ASTM, and ISO codes and standards relevant to piping and welding inspection.

  • Proficient in reading and interpreting isometric drawings, P&IDs, and welding symbols.

  • Knowledge of pressure testing procedures, mechanical test witnessing, and documentation protocols.

  • Hands-on experience using inspection and measurement tools as per QA/QC practices.

  • Conversant with Oil & Gas industry HSE requirements, safe work practices, and quality management systems (ISO 9001).


Qualifications:



  • Diploma or Bachelor’s Degree in Mechanical Engineering or equivalent.

  • CSWIP 3.1 / 3.2 certification (mandatory).

  • ASNT Level II in RT, UT, MT, and PT (preferred).

  • Minimum 5 years of post-CSWIP experience in piping and welding inspection within Oil & Gas or Petrochemical projects.


Job Snapshot


Updated Date


16.11.2026


Job ID


JOB_89


Department


Quality Control


Location

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Welding Inspector
Welding Inspector

SGS • Um Al Zumoul

On-site
AED 240,000 - 360,000
Welding Inspector
Welding Inspector

SGS • Abu Dhabi

On-site
AED 120,000 - 240,000
Project QC Inspector
Project QC Inspector

Ali & Sons • Abu Dhabi

On-site
AED 100,000 - 145,000
Quality Control Welding / Piping Inspector
Quality Control Welding / Piping Inspector

SGS • Abu Dhabi

On-site
AED 240,000 - 360,000
Competitive salary package
Food allowance
Accommodation and local transportation
+2
Welding Inspector - Power Plant
Welding Inspector - Power Plant

TRACTEBEL ENGINEERING S.A DUBAI BRANCH • Abu Dhabi

On-site
AED 180,000 - 300,000
QA/QC Inspector, Welding
QA/QC Inspector, Welding

Ghobash Group • Abu Dhabi

On-site
AED 180,000 - 300,000
Quality Control Welding / Piping Inspector
Quality Control Welding / Piping Inspector

SGS • Habshan

On-site
AED 240,000 - 360,000
Competitive salary package
Food allowance and site benefits
Accommodation and local transportation
+2
Pipeline Welding Engineer | Lead, Quality & Safety
Pipeline Welding Engineer | Lead, Quality & Safety

EPIC Piping • Abu Dhabi

On-site
Confidential
QA/QC / Welding Inspector- DUBAI
QA/QC / Welding Inspector- DUBAI

Naya Jobs • Dubai

On-site
AED 279,000 - 469,000
Mechanical Inspector
Mechanical Inspector

Duruper • Abu Dhabi

On-site
AED 246,000 - 357,000
Top locations