Job Title: Specialist Process Engineer

KBR

United Arab Emirates

Sur place

AED 300 000 - 520 000

Plein temps

14 jours+

Obtenez une réponse de cet employeur

Votre CV et votre lettre de motivation, adaptés exactement à ce que l’employeur recherche.

Passez les filtres ATS

Résumé du poste

KBR Abu Dhabi PMC Team is seeking a Specialist Process Engineer to provide expert process engineering oversight for a major ADNOC Offshore project.

The role reviews EPC contractor deliverables, validates process design integrity and supports FEED through commissioning with strong offshore experience.

Qualifications

  • Bachelor's Degree in Chemical Engineering or a related discipline.
  • Extensive process engineering experience in oil & gas.
  • Strong offshore EPC/PMC project experience.
  • Proven FEED and detailed engineering exposure.
  • Significant experience in process design and review of offshore facilities.
  • Prior ADNOC/ADNOC Offshore exposure preferred.
  • Knowledge of process simulation tools (Aspen HYSYS/PRO-II).
  • Strong calculations, sizing, PFDs/P&IDs and process philosophies.

Responsabilités

  • Provide specialist technical expertise for process engineering and design activities.
  • Review EPC contractor process deliverables and ensure technical integrity of design.
  • Perform or review process simulations using HYSYS/PRO-II; generate heat and material balances.
  • Review equipment sizing, PFDs, P&IDs and process datasheets.
  • Coordinate with disciplines to ensure project execution readiness.
  • Review relief loads, PSV sizing, and safety documentation.
  • Update PFDs and P&IDs during development.
  • Participate in HAZID/HAZOP and other safety reviews.
  • Assist in vendor document review and design changes.

Connaissances

Process engineering
Offshore oil & gas
PFDs & P&IDs
Process simulations
EPC/PMC
ADNOC Offshore
Aspen HYSYS
PRO-II
FEED & Detailed Engineering
Process safety
Vendor review
Interface management

Formation

Bachelor's Degree in Chemical Engineering

Outils

Aspen HYSYS
PRO-II

Description du poste

Job Title: Specialist Process Engineer

Job Title: Specialist Process Engineer

Belong, Connect, Grow, with KBR!

The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.

KBR Abu Dhabi PMC Team is currently seeking experienced professionals for the position listed below in support of a major Offshore Project. The role will be based at either the Client's Office or the Contractor's Office in Abu Dhabi, UAE.

Job Purpose

The Specialist Process Engineer will provide specialist technical expertise, engineering assurance and oversight of process engineering activities for a major ADNOC Offshore project.

The role will review and monitor EPC Contractor process engineering deliverables, ensure technical integrity of the process design, resolve complex technical issues, and coordinate closely with other engineering disciplines throughout project execution.

Key Responsibilities
  • Provide specialist technical expertise for process engineering and design activities.
  • Review and monitor process engineering work performed by EPC Contractors and engineering consultants.
  • Review and validate key process engineering deliverables, including:
    • Design Basis
    • Process Flow Diagrams (PFDs)
    • Piping & Instrumentation Diagrams (P&IDs)
    • Heat & Material Balances
    • Process Datasheets
    • Process Calculations
    • Equipment Sizing
    • Line Sizing
    • Relief and Blowdown Calculations
    • Cause & Effect / Shutdown requirements
    • Process Control Philosophies
  • Perform or review process simulations for upstream/offshore oil and gas facilities. Process simulation using tools such as Aspen HYSYS and PRO-II, along with Heat & Material Balance generation, is reflected in specialist process engineering experience within ADNOC Offshore PMC work.
  • Review process equipment sizing and associated process datasheets.
  • Review process requirements for separators, compressors, pumps, heat exchangers and associated production facilities.
  • Review relief load calculations, PSV sizing, relief and blowdown philosophies, and related process safety documentation. These activities are specifically reflected in ADNOC Offshore PMC process engineering experience.
  • Review and update PFDs and P&IDs as required during project development.
  • Review control philosophy, shutdown philosophy and Cause & Effect requirements.
  • Participate in HAZID, HAZOP and other project technical/safety reviews as required.
  • Review EPC Contractor technical queries, deviations and proposed engineering changes within the process discipline.
  • Coordinate with Mechanical, Piping, Pipeline, Electrical, Instrumentation & Control, Civil/Structural and other engineering disciplines.
  • Review vendor documentation and provide specialist process engineering input for package equipment.
  • Identify process design risks and support development of technically appropriate solutions.
  • Ensure process engineering deliverables are suitable for subsequent procurement, construction and commissioning activities.
  • Provide technical support during construction, pre-commissioning, commissioning and start-up as required.
  • Support troubleshooting and resolution of process-related technical issues.
  • Provide technical guidance to Process Engineers and other members of the multidisciplinary project team.
  • Ensure lessons learned and engineering best practices are incorporated into process design.
Typical Process Systems
  • Oil & Gas Separation
  • Gas Compression
  • Gas Dehydration / Treatment
  • Production and Test Separation
  • Produced Water Treatment
  • Water Injection
  • Chemical Injection
  • Fuel Gas Systems
  • Flare / Relief / Blowdown Systems
  • Closed and Open Drain Systems
  • Utility Systems
  • Offshore Process Modules and Packages
  • Process Safety / Emergency Shutdown Interfaces
Qualifications & Experience
  • Bachelor's Degree in Chemical Engineering or a relevant engineering discipline.
  • Extensive Process Engineering experience within the Oil & Gas industry.
  • Strong experience in offshore Oil & Gas EPC / PMC projects.
  • Proven experience covering FEED and Detailed Engineering. A public profile for a Process Specialist Engineer working in an ADNOC Offshore PMC environment describes expertise spanning conceptual design, basic engineering, FEED, detailed engineering and PMC roles.
  • Significant experience in process design and technical review of offshore production facilities.
  • Previous ADNOC / ADNOC Offshore project experience is strongly preferred for this requirement.
  • Strong working knowledge of process simulation tools such as Aspen HYSYS / PRO-II or equivalent.
  • Strong knowledge of process engineering calculations, equipment sizing, PFDs, P&IDs and process philosophies.
  • Good understanding of process safety, relief and depressurization systems.
  • Experience reviewing contractor and vendor engineering deliverables.
  • Strong multidisciplinary coordination and interface management skills.
  • Excellent analytical, technical problem-solving and communication abilities.
  • A June 2026 recruitment listing for an ADNOC Offshore PMC project also identifies process engineers among the engineering positions and emphasizes experienced professionals with offshore oil & gas and ADNOC/PMC/EPC backgrounds.
  • For this ADNOC Offshore requirement, I would prioritize candidates with offshore production facilities experience, FEED and Detailed Engineering exposure, process simulation expertise, PFD/P&ID and process safety experience, EPC/PMC design-review responsibilities, and previous ADNOC Offshore exposure.
Obtenez votre examen gratuit et confidentiel de votre CV.

ou faites glisser et déposez votre fichier ici.

Similar jobs

Postes similaires à comparer

Job Title: Specialist Process Engineer
Job Title: Specialist Process Engineer

KBR Technical Services • Abu Dhabi

Sur place
AED 350 000 - 550 000
Senior Process Engineer - Greenfield
Senior Process Engineer - Greenfield

KBR • Émirats arabes unis

Sur place
AED 900 000 - 1 200 000
Job Title: Specialist Process Engineer
Job Title: Specialist Process Engineer

KBR • Abu Dhabi

Sur place
AED 180 000 - 240 000
Offshore Process Engineering Specialist
Offshore Process Engineering Specialist

KBR Technical Services • Abu Dhabi

Sur place
AED 350 000 - 550 000
Senior Process Engineer - Greenfield
Senior Process Engineer - Greenfield

KBR Technical Services • Abu Dhabi

Sur place
AED 400 000 - 640 000
Specialist Process Safety Engineer
Specialist Process Safety Engineer

KBR • Abu Dhabi

Sur place
AED 502 200 - 837 000
Job Title: Specialist Safety Engineer – Technical
Job Title: Specialist Safety Engineer – Technical

KBR • Émirats arabes unis

Sur place
AED 350 000 - 520 000
Senior Offshore Process Engineer – PMC & FEED Expert
Senior Offshore Process Engineer – PMC & FEED Expert

KBR • Abu Dhabi

Sur place
AED 180 000 - 240 000
Job Title: Specialist Safety Engineer - Technical
Job Title: Specialist Safety Engineer - Technical

kbr • Abu Dhabi

Sur place
AED 260 000 - 380 000
Specialist Engineer – Process ( Offshore Wellhead Tower, Subsea Cable & Piping)
Specialist Engineer – Process ( Offshore Wellhead Tower, Subsea Cable & Piping)

KBR • Abu Dhabi

Sur place
AED 250 000 - 300 000
Lieux principaux